Categories: Wireless Microphone Systems
The DJI Mic 2 Clip-On Transmitter/Recorder is a black transmitter with both built-in microphone and onboard recording capabilities for seamless audio recording. Use in tandem with a separately available receiver, expand your preexisting Mic 2 wireless system, or connect to a mobile device/Osmo series camera via Bluetooth. The transmitter utilizes both 2.4 GHz digital and Bluetooth technology to communicate with the dual-channel receiver or even your DJI Osmo Pocket 3 or Action 4 camera from up to 820' away.
Onboard recording is facilitated thanks to the transmitter's internal 8GB storage for up to 14 hours of recorded audio. The transmitter supports 24-bit audio at 48 kHz and even allows for 32-bit float audio recording in tandem with the DJI Mimo app. This recording mode provides a high dynamic range for complex sound environments. Bluetooth connection with the Mimo app can toggle intelligent noise cancelling during video recording with compatible devices. A built-in rechargeable battery can run for up to 6 hours at a time and can be recharged via USB-C cable or separately available charging case.
| Wireless Technology | Digital 2.4 GHz / Bluetooth |
| Diversity | Non-Diversity |
| Max Operating Range | 820.2' / 250 m |
| Included Transmitters | 1x Clip-On |
| Microphone Type | 1x Built-In (Clip-On Transmitter) |
| Included Charging Case | No |
System
| Wireless Technology | Digital 2.4 GHz / Bluetooth |
| Diversity | Non-Diversity |
| RF Channel Scanning | Auto-Scan |
| Max Operating Range | 820.2' / 250 m |
| Max Transmitters per Band | 2 |
| Encryption | No |
| Built-In Recorder | Yes (on Transmitter) |
| Timecode Support | Yes |
| Mobile App Compatible | Yes: Android & iOS App Name: DJI Mimo |
Transmitters
| Included Transmitters | 1x Clip-On |
| Antenna | Internal |
| Input Level | Microphone |
| Audio I/O | 1x 1/8" / 3.5 mm TRS Female Input |
| USB I/O | 1x USB-C |
| Muting | No |
| Auto-Level/Gain | No |
| Frequency Response | 50 Hz to 20 kHz 100 Hz to 20 kHz |
| Sync Method | 2.4 GHz QPSK |
| Display | Single-LED Indicators Only |
Microphones
| Microphone Type | 1x Built-In (Clip-On Transmitter) |
| Polar Pattern | Omnidirectional |
| Frequency Response | 100 Hz to 20 kHz (Low Cut Off) 50 Hz to 20 kHz (Low Cut On) |
| Maximum SPL | 120 dB |
| Color | Black |
Power
| Transmitter Battery Type | 1x Built-In Rechargeable - 360 mAh |
| Transmitter Battery Life | 6 Hours |
| Battery Charging Time | 70 Minutes |
| Included Charging Case | No |
| AC/DC Power Adapter | No |
Physical
| Environmental Resistance | No |
| Dimensions | 1.8 x 1.2 x 0.9" / 45.7 x 30.5 x 22.9 mm |
| Weight | 1 oz / 28 g |
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.