0 0
0
No products in the cart.

Shopping Cart

Miller CX14 Sprinter II 1-Stage Aluminum Alloy Tripod System with Rubber Feet and Mid-Level Spreader

Brand: Miller

MFR: 3782

SKU: SF-2443-GXED

15,992.00

  • 30.9 lb Capacity CX14 Fluid Head
  • Sprinter II Aluminum Tripod
  • 32.4 to 62.3" Height Range
  • Set of Three Rubber Feet
  • Mid-Level Spreader
  • Soft Case for 1-Stage Tripod Systems

Items Included


    • Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (2.4")
    • Miller Pan Handle for Compass15 and Compass20 Fluid Heads
      • Back Pack Straps
Not in stock - Order now and we'll deliver when available - Normally ships in 4-6 weeks
Quantity

The Miller CX14 Sprinter II 1-Stage Aluminum Alloy Tripod System with Rubber Feet and Mid-Level Spreader includes a CX14 fluid head with pan handle, a Sprinter II 100mm 1-stage aluminum alloy tripod, a mid-level spreader, a set of three rubber feet, and an Arrowx two-stage soft case. The CX14 fluid head supports up to 30.9 pounds and employs CB Plus technology, providing 15+0 positions of counterbalance and 5+0 levels of pan and tilt settings with 2.4" of camera plate travel.

The head is matched with the 2-stage Sprinter II aluminum alloy tripod and together, the system has a height range of 32.4 to 62.3". The included mid-level spreader is well suited for use when working on uneven terrain, while the included rubber boots cover the tripod legs spikes to protect delicate floors and provide grip on hard or slick surfaces. The soft case has removable back pack straps that allow you to carry the system without occupying your hands.

Miller CX14 Fluid Head

The Miller CX14 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 30.9 pounds, suitable for broadcast, cine-style, or DSLR cameras. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX14 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX14 will perform reliably. The base of the CX14 is a 100 ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX14 in dark environments. A pan handle with a 15.4" fixed length is included and a second rosette is incorporated for attaching an optional second pan handle.

Miller Sprinter II 1-Stage Alloy Tripod (Mid-Level Spreader Ready)

The Miller Sprinter II 1-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.

Miller 993 Mid-Level Spreader

The Miller 993 Mid-Level Spreader is a mid-level spreader for Sprinter, Arrow 25/40, and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings, plus a latch and swivel design.

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Arrowx softcase 1 Stage for Sprinter II 1 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 1 Stage for Sprinter II 1 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.


Head
Camera Mounting
1/4"-20 & 3/8"-16 Screws (Sideload Quick Release w/ Sliding Balance Plate: Miller 1205)
Head Type
Fluid Head
Base Mount
100 mm Half Ball
Counter Balance
Incremental 15-Step Plus 0
Dimensions
Base Diameter: 3.94" / 100.00 mm
Height: 5.9" / 150.00 mm
Camera Plate: 4.7 x 1.9" / 120.00 x 48.5 mm
Pan & Tilt
Drag Control
Yes
Independent Pan Lock
Yes
Independent Tilt Lock
Yes
Vertical Tilt
+90° to -75°
Lateral Tilt
No
General
Load Capacity
30.9 lb / 14 kg
Accessory Mounting
2x Pan Handle Fitting
Bubble Level
Yes (Illuminated)
Weight
5.51 lb / 2.5 kg
Packaging Info
Package Weight
8.5 lb
Box Dimensions (LxWxH)
11.7 x 9.9 x 7.8"

Add your review

Your email address will not be published. Required fields are marked *

Please login to write review!

Upload photos

Looks like there are no reviews yet.

Items Included


    • Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (2.4")
    • Miller Pan Handle for Compass15 and Compass20 Fluid Heads
      • Back Pack Straps