The ALEXA Mini LF Accessory Set 15 Essential from ARRI is a combination of key accessories suited for handheld setups and for use with gimbal and stabilizers like the MAXIMA and Trinity. This 15mm studio rod-based bundle includes a compact bridge plate with shoulder mount, a 12" dovetail, a set of accessory mounting brackets, a CCH-2 top handle, an EVF mounting system, an RAB-1 Clamp 2, and a 6.6' camera power cable. This set requires a separately available distribution box, battery, and set of rods.
ARRI Mini Adapter Plate MAP-2A
The MAP-2A Adapter Plate for ALEXA Mini from ARRI has been updated from earlier versions with an improved rod clamping mechanism. Designed to mount on either the bottom or top of the camera, this adapter enables you to flesh out your ALEXA Mini rig with 15mm LWS rod-mounted accessories (rods available separately).
Wing-style rod holder fasteners on the MAP-2A replace the lever fasteners found on earlier models making for quicker, easier builds and breakdowns. The MAP-2A adapter plate is compatible with studio bridge plates when used with the separately available BPA-4 adapter. Tape measure studs on both sides of the plate aid in measuring precise focus distances.
ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini
Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.
Compatible Cameras
ALEXA Mini
ARRI Mini Side Bracket MSB-3
The Mini Side Bracket MSB-3 from ARRI is a cage-style component compatible with ALEXA Mini and Mini LF cameras. Designed to fit around the ALEX Mini LF's onboard recorder and its viewfinder connector, this left-side bracket is backwards compatible with, but not required for, the ALEXA Mini.
This bracket helps to protect the camera body while providing multiple 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.
Compatibility
ALEXA Mini LF, ALEXA Mini
Features
ARRI Mini Side Bracket MSB-2
The Mini Side Bracket MSB-2 from ARRI is a cage-style component compatible with the ALEXA Mini and the right side of the ALEXA Mini LF. This bracket's single rod holder enables lens motor support for lightweight handheld or drone rigs lacking a baseplate rod bracket. The MSB-2 bracket offers native 19mm rod support and 15mm rod support using a separately available bushing.
The MSB-2 bracket incorporates several 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.
Compatibility
ALEXA Mini and ALEXA Mini LF right side
Features
ARRI Compact Bridge Plate CBP-2 15mm for ALEXA Mini/Mini LF
The ARRI Compact Bridge Plate CBP-2 15mm provides a lightweight option for mounting 15mm Studio-standard accessories to your ALEXA Mini or Mini LF camera. A sliding balance mechanism and quick release system offer the adjustability of a studio bridge plate at a reduced weight. Features include right and left rosettes, front 15mm Studio rod support, and a built-in, contoured shoulder pad. Use the CBP-2 15mm bridge plate to mount camera accessories onto a pair of separately available rods or the ARRI-standard rosettes.
Quick Mounting/Detaching
Optional Rod Brackets
Dual Rosettes
Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory.
Contoured Shoulder Pad
Integrated, contoured shoulder pad increases comfort while operating handheld.
ARRI Rear Accessory Bracket RAB-1
The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.
ARRI RAB-1 Clamp 2
Designed for use with the ALEXA Mini LF camera, the ARRI RAB-1 Clamp 2 is an updated version of the earlier RAB-1 Clamp. The Clamp 2 mounts an ARRI battery plate or power-splitting box further on the left to accommodate the second row of connectors on the rear of the ALEXA Mini LF.
Part of a modular accessory support system, the Clamp 2 is used with the separately available RAB-1 Rear Accessory Bracket. This clamp features a locking mechanism for additional security.
Compatibility
ARRI ALEXA Mini LF camera
ARRI Rod Mounting Bracket (RMB-3)
Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.
Rod Compatibility
19mm
15mm (with separately available insert K2.66255.0)
ARRI 15mm Reduction Insert for 19mm Rod
The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.
ARRI CCH-2 Center Camera Handle
Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.
Features
ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6')
Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.
ARRI Bottom Dovetail Plate (12" / 300mm)
Less is more when you're lugging your rig around, so opt for this 12" Bottom Dovetail Plate from ARRI with a weight-reducing cutout design for balancing your camera setup. This updated dovetail offers a medium travel range suitable for prime lenses, and it sports several features that distinguish it from earlier models.
Safety release buttons are located both at the front and back of the dovetail. The front release is especially helpful when using accessories like lens motors that may hang below the level of the baseplate, preventing an easy backward slide off the dovetail. Two removable stopper screws provide additional security when desired and can be parked on the plate when not in use.
Constructed of a robust aluminum alloy, this dovetail has built-in 3/8"-16 and 1/4"-20 threads for mounting on a tripod or quick release plate.
Compatible Heads
Including but Not Limited to:
O'Connor 2060, 2575, 120EX
Sachtler Cine 30
Features
Support Type | Baseplate |
Grip Type | No |
Camera Compatibility | ARRI ALEXA Mini LF |
Mounting
Rod Standard | 15 mm LWS / 60 mm Spacing |
Rod Ports | 2 x 15 mm Rod Port |
Rosettes | No |
General
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.54 lb |
Box Dimensions (LxWxH) | 6.2 x 5.75 x 1.2" |
Rod Standard | 15 mm LWS |
Dimensions | 5.9 x 6.3 x 2.4" / 15.0 x 16.0 x 6.0 cm |
Weight | 12.1 oz / 342 g |
Packaging Info
Package Weight | 0.775 lb |
Box Dimensions (LxWxH) | 9.75 x 5 x 2.35" |
Accessory Mounting | Multiple Anti-Twist 3/8"-16 Threads Multiple 1/4"-20 Threads 1 x ARRI Rosette |
Dimensions | 6.3 x 2.4 x 1.2" / 160 x 60 x 30 mm |
Weight | 3.3 oz / 93 g |
Packaging Info
Package Weight | 0.21 lb |
Box Dimensions (LxWxH) | 6.25 x 6.2 x 1.2" |
General
Accessory Mounting | 3 x Anti-Twist 3/8"-16 Threads 4 x 1/4"-20 Threads 1 x ARRI Rosette |
Rod Support | 1 x 19mm |
Dimensions | Not Specified by Manufacturer |
Weight | 4.2 oz / 119 g |
Packaging Info
Package Weight | 0.28 lb |
Box Dimensions (LxWxH) | 6.05 x 5.85 x 1.75" |
Support Type | Shoulder Support |
Grip Type | No |
Camera Compatibility | ARRI ALEXA Mini, ARRI ALEXA Mini LF |
Mounting
Rod Standard | 15 mm Studio / 100 mm Spacing |
Battery Plate Type | No |
Accessory Mounting | No |
Rod Ports | 2 x 15 mm Rod Port |
Shoe Mounting | No |
Rosettes | Sides: 2 x ARRI Rosette w/ M6 Female Thread |
Cable Clamp | No |
General
Materials | Aluminum, Rubber, Steel |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 2.5 lb |
Box Dimensions (LxWxH) | 10.5 x 5.5 x 3.5" |
General
Accessory Mounting Threads | 3/8"-16, 1/4"-20 |
Dimensions and Weight | Not specified by manufacturer |
Packaging Info
Package Weight | 0.5 lb |
Box Dimensions (LxWxH) | 7.4 x 6 x 1.5" |
Dimensions and Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.355 lb |
Box Dimensions (LxWxH) | 4.15 x 3.5 x 1.5" |
Dimensions | 1.2 x 1.6 x 1.6" / 30 x 40 x 40 mm |
Weight | 1.3 oz / 38 g |
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 4.3 x 3.6 x 0.6" |
Adapter Type | 19 to 15mm |
Dimensions and Weight | Not specified by manufacturer |
Packaging Info
Package Weight | 0.02 lb |
Box Dimensions (LxWxH) | 5.2 x 4.25 x 0.85" |
Key Specs
Item Type | Single Handgrip |
General
Item Type | Single Handgrip |
Physical
Dimensions | 5.9 x 3.9 x 2.6" / 15 x 10 x 6.5 cm |
Weight | 8.7 oz / 248 g |
Packaging Info
Package Weight | 0.565 lb |
Box Dimensions (LxWxH) | 8.15 x 4.6 x 3.9" |
Connector 1 | 1 x 3-Pin XLR |
Connector 2 | 1 x 8-Pin LEMO |
Cable Length | 6.6' / 2 m |
Packaging Info
Package Weight | 0.6 lb |
Box Dimensions (LxWxH) | 11 x 8.4 x 1.1" |
Material of Construction | Aluminum Alloy |
Mounting Threads | Multiple: 3/8"-16, 1/4"-20 |
Dimensions | 12 x 4 x 1.2" / 300 x 100 x 30 mm |
Weight | 1.07 lb / 487 g |
Packaging Info
Package Weight | 1.12 lb |
Box Dimensions (LxWxH) | 14 x 4.55 x 1.55" |