This LMB 4x5 Clamp Adapter Basic 15mm LWS Set from ARRI includes the four most popular LMB 4x5 clamp adapters, screw-in reduction rings, and the 143mm adapter, which provides the possibility to attach the LMB 4x5 on 15mm lightweight support rods.
ARRI R2 138mm Filter Ring (143 / 114mm, Internal Focus Lens)
This ARRI R2 138mm Filter Ring fits into the back of ARRI matte boxes with a rear opening of 143mm, and is for internal focus lenses only. It enables mounting a 138mm round filter, such as a polarizer, onto your matte box and allowing for rotation of the filter. The R2 ring acts as an anti-refection donut and supports lenses with a front outer diameter of 114mm such as Master Primes, Ultra Prime, and LDS Ultra Primes.
The ring will allow you to use wide-angle video lenses as well, but only lenses with an internal focus design. It will accept optional R4 reduction rings, which allow you to use select lenses with a front outer diameter of less than 114mm.
ARRI R4 Screw-In Reduction Ring for R2 138mm Filter Ring (114 to 95mm)
The 114 to 95mm ARRI R4 Screw-In Reduction Ring screws into your R2 138mm filter ring and reduces the rear opening from 114 to 95mm. This creates a light-tight seal when using a lens with a 95mm front, preventing light from leaking around the edge of your lens and potentially flaring the image. The reduction ring is threaded to accept available ARRI R5 reduction rings (not included), allowing you to use a variety of smaller diameter lenses with your setup.
ARRI R4 Screw-In Reduction Ring for R2 138mm Filter Ring (114 to 80mm)
The 114 to 80mm ARRI R4 Screw-In Reduction Ring screws into your R2 138mm filter ring and reduces the rear opening from 114 to 80mm. This creates a light-tight seal when using a lens with an 80mm front, preventing light from leaking around the edge of your lens and potentially flaring the image. The reduction ring is threaded to accept available ARRI R5 reduction rings (not included), allowing you to use a variety of smaller diameter lenses with your setup.
ARRI 15mm LWS Console for LMB 4x5 Clamp and Tilt/Flex Adapters
A screw-in standard 15 mm lightweight support console, compatible with both the LMB 4x5 143 mm clamp adapter and the LMB 4x5 tilt and flex adapter.
General
Accessory Type | Clamp adapter |
Accessories
Intended For | Lens, matte box |
Packaging Info
Package Weight | 0.205 lb |
Box Dimensions (LxWxH) | 6.95 x 6.1 x 0.85" |
General
Accessory Type | Clamp adapter |
Width | 7.1 in |
Depth | 0.4 in |
Height | 5.5 in |
Weight | 3.88 oz |
Accessories
Intended For | Lens, matte box |
Packaging Info
Package Weight | 0.24 lb |
Box Dimensions (LxWxH) | 10.35 x 6.8 x 0.95" |
Dimensions | L: 1.4 x W: 6.7 x H: 9.8" / L: 35 x W: 170 x H: 250 mm |
Weight | 4.8 oz / 136 g |
Packaging Info
Package Weight | 0.3 lb |
Box Dimensions (LxWxH) | 6.8 x 6.5 x 1.4" |
Dimensions | ø: 4.9 x L: 0.4" / ø: 12.5 x L: 1 cm |
Weight | 1.6 oz / 45 g |
Packaging Info
Package Weight | 0.105 lb |
Box Dimensions (LxWxH) | 4.95 x 4.9 x 0.85" |
Dimensions | ø: 4.9 x L: 0.4" / ø: 12.5 x L: 1 cm |
Weight | 1.4 oz / 39 g |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 5.3 x 4.8 x 0.8" |
General
Accessory Type | Rod bridge |
Accessories
Intended For | Camera rig, matte box, 15 mm rod |
Packaging Info
Package Weight | 0.15 lb |
Box Dimensions (LxWxH) | 3.9 x 2 x 0.5" |