The LMB 6x6 Pro 19mm Studio Set from ARRI includes a wide array of modular LMB 6x6 matte box components. This most complete of several sets offered by ARRI includes stationary two- and single-filter stages, and one single-filter rotating stage. The LMB 6x6 may be mounted on 19mm studio rods or clamped onto lenses with 80-156mm outside diameters using the included Tilt and Flex Adapter. It is also compatible with separately available clamp adapters to fit various lens diameters.

Light-deflecting components include one top/bottom flag, two side flags, a pair of flag holders, and sets of both spherical and anamorphic formatted mattes. A combo swing-away/tilt arm module facilitates quick lens changes by providing access to the lens port without having to slide the matte box off its supporting rods. The tilt function supports filters at a 10° angle, eliminating or reducing unwanted reflections such as car headlights, etc. Use the sliding LMB accessory adapter to attach a 3/8"-16-mountable item such as a focus rangefinder to the matte box.

ARRI LMB 6x6 Basic Module

The ARRI LMB 6x6 Basic Module is the core of the highly modular, lightweight LMB 6x6 matte box system. This module includes two 6.6 x 6.6" filter trays, a sunshade, a backplate with filter guides, two top flag holders, and a #0 matte.

The included #0 matte can be quickly snapped into the sunshade to protect your lens from dirt and dust while repositioning your camera or during a break in filming. This module features tray catchers for precisely holding the frames in place.

This adaptable LMB 6x6 Basic Module can be used with separately available lens clamp-on rings or mounted using 15 or 19mm rod supports. Components like a Swing-Away Tilt Module, top flag, mattes, and extra filter stages are available separately, enabling you to configure the system in as minimal or complete a configuration as needed. The LMB 6x6 Basic Module comes packed in a foam insert made to fit into a Pelican Case 1637.

Features

• Includes two 6.6 x 6.6" filter frames
• Tray catchers hold the filter frames precisely in place
• The included matte can be quickly snapped onto the matte box to protect your lens
• Mounts via separately available lens adapter clamps or 15mm/19mm rod support
• Configure as needed with separately available components
• Includes a foam insert to hold the matte box components in a Pelican 1637 case

ARRI LMB 6x6 Swing-Away Tilt Mod. 19mm Studio

The ARRI LMB 6x6 Swing-Away Tilt Mod. 19mm Studio enables you to extend the LMB 6x6 matte box away from your lens with a simple twist, saving time when changing or cleaning your lens.

This bracket also provides up to 10° of tilt for angling your filter to reduce or eliminate unwanted reflections. The LMB 6x6 Swing-Away Tilt Mod. is compatible with the 19mm studio rod standard.

Features

• For the ARRI LMB 6x6 lightweight matte box
• Enables matte box to swing away for quicker lens changes
• Tilts filters up to 10° to reduce unwanted reflections
• 19mm studio rod standard

ARRI LMB 19mm Studio Rod Adapter

The ARRI LMB Studio Rod Adapter adds 19mm studio rod support to one of several components used with the LMB 4x5 or LMB 6x6 matte box. This adapter features thumb-lever rod locks and a toolless, screw-in design for quick mounting.

Compatibility

LMB 4x5 15mm Lightweight Console

LMB 4x5 swing Away Tilt Module

LMB 6x6 Clamp Adapter 143mm

LMB 6x6 Clamp Adapter 156mm

LMB 6x6 Tilt and Flex Adapter

ARRI LMB 6x6 Tilt and Flex Adapter 80-156mm

ARRI's LMB 6x6 Tilt and Flex Adapter 80-156mm can be used to bridge any gap between extending front elements on your lens and an LMB 6x6 matte box. This adapter is compatible with lenses incorporating a front outer diameter between 80 and 156mm.

The Tilt and Flex Adapter will also compensate for the tilting angle created when using a Swing-Away Tilt Module with the LMB 6x6 matte box. An interface at the bottom of the adapter can accommodate either the LMB 15mm or LMB 19mm Studio Rod Adapter.

Features

• Fits lenses with diameters between 80 and 156mm
• Bridges gap created by a lens with extending front elements or by a Swing-Away Tilt Module
• Integrated rod interface for 15 or 19mm rods

ARRI LMB 6x6 Extra Rotatable Filter Stage

The ARRI LMB 6x6 Extra Rotatable Filter Stage enables you to rotate a single 6.6 x 6.6" filter frame 360°. Use this LMB 6x6 stage by itself as an ultralight filtering option for gimbal, stabilizer, or drone use, or add it to a two-filter stage to hold a third filter.

This rotating filter stage incorporates tray catchers for precisely securing a filter frame, and it can mount the LMB 6x6 sunshade directly onto its front. No tools are needed for mounting; the stage is attached using two integrated thumbscrews.

Features

• Use to rotate a filter up to 360°
• Holds one 6.6 x 6.6" filter frame
• Offers single-filter mounting for gimbal, stabilizer, or drone use
• Designed for ARRI LMB 6x6 lightweight matte box
• Can directly support the LMB 6x6 sunshade

ARRI LMB 6x6 Extra Non-Rotatable Filter Stage

The ARRI LMB 6x6 Extra Non-Rotatable Filter Stage holds one 6.6 x 6.6" filter frame. Use this LMB 6x6 stage by itself as an ultralight filtering option for gimbal, stabilizer, or drone use, or add it to a two-filter stage to hold a third filter.

This filter stage incorporates tray catchers for precisely securing a filter frame, and it can mount the LMB 6x6 sunshade directly onto its front. No tools are needed for mounting; the stage is attached using two integrated thumbscrews.

Features

• Holds one 6.6 x 6.6" filter frame
• Offers single-filter mounting for gimbal, stabilizer, or drone use
• Designed for ARRI LMB 6x6 lightweight matte box
• Can directly support the LMB 6x6 sunshade

ARRI LMB 6x6 Top, Bottom Flag

Compatible with the LMB 6x6 lightweight matte box, the ARRI LMB 6x6 Top, Bottom Flag provides flare control for your lens, preventing a loss in image quality caused by stray light.

The lightweight flag incorporates two extendable wings and can be used at the top or bottom of the matte box. This flag can also be used to physically protect the front of the lens when moving your camera rig between shots or during a break in recording.

Features

• Can be attached to the top or bottom of the LMB 6x6 matte box
• Two built-in wings for extended flare control
• Carbon fiber construction
• Can be used to shield the lens front between shots or during breaks

ARRI LMB 6x6 Side Flags

These ARRI LMB 6x6 Side Flags are used to provide additional flare control on an LMB 6x6 matte box. Each of these lightweight carbon fiber flags feature an extendable panel for precise shading control.

Both flags and the separately available Top/Bottom Flag can be folded flat on the matte box, saving time when building and disassembling your camera rig.

Features

• Left and right side flags for an LMB 6x6 matte box
• Built-in extension panels for blocking the maximum amount of light
• Carbon fiber construction is suitable for handheld, drone, stabilizer, and other lightweight rigs
• Flags can remain attached to the matte box for storage, saving setup time

ARRI LMB Flag Holders

This pair of ARRI LMB Flag Holders is compatible with the LMB 4x5 and 6x6 lightweight matte boxes. The holders can be attached to the top, bottom, or sides of your matte box.

Each holder screws into the matte box and has a captive knurled knob to hold the flag in place.

Features

• Compatible with ARRI LMB 4x5 and 6x6 lightweight matte boxes
• Mounts on top, bottom, or sides of your matte box
• Captive knurled knob holds the flag in place

ARRI LMB Accessory Adapter

The ARRI LMB Accessory Adapter is used to mount one 3/8"-16 accessory to an ARRI LMB 4x5, LMB 6x6, LMB-25, or LMB-6 matte box. This T-shaped adapter features a sliding 3/8"-16 shoe that enables you to position a rangefinder or other device for optimal line-of-sight use.

Features

• Compatible with ARRI LMB 4x5, LMB 6x6, LMB-25, and LMB-6 lightweight matte boxes
• Use to mount one 3/8"-16 accessory like an ultrasonic rangefinder
• Threaded shoe slides for optimal positioning

ARRI LMB 6x6 Set of Mattes Spherical

The ARRI LMB 6x6 Set of Mattes Spherical includes five hard mattes for use with the LMB 6x6 lightweight matte box. Each matte has a different spherical aspect ratio opening and snaps into place on the matte box sunshade.

Use these mattes for additional blocking of stray light that may cross the edges of your matte box.

Features

• Each matte snaps into place on the sunshade of the ARRI LMB 6x6 matte box
• For use with spherical lenses
• Five mattes cover different focal length ranges

ARRI LMB 6x6 Set of Mattes Anamorphic

The ARRI LMB 6x6 Set of Mattes Anamorphic includes five hard mattes for use with the LMB 6x6 lightweight matte box. Each matte has a different anamorphic aspect ratio opening and snaps into place on the matte box sunshade.

Use these mattes for additional blocking of stray light that may cross the edges of your matte box.

Features

• Each matte snaps into place on the sunshade of the ARRI LMB 6x6 matte box
• For use with anamorphic lenses
• Five mattes cover different focal length ranges