Keep your set powered with up to 560W of redundant power with this Field Gold Mount Battery Power Station housed in an impact-resistant case from BLUESHAPE. The rugged power station allows you to install up to four separately available Gold mount batteries to provide power output to your camera, lights, and accessories.
The case interior features four Gold mount battery plates that are hot swappable, and an LCD screen in the center provides information about battery delivery current, voltage, and total power available. There are also two 5V/3A USB ports that provide up to 15W of power to your accessories. An AC socket allows you to plug in the included AC battery chargers which, while charging the batteries, will also act as a redundant power source. When one power source fails, the failover is seamless.
On the outside of the case there are two 14V 4-pin outputs that provide up to 340W as a pair and they are always active. Two 28V and two 48V 3-pin XLR outputs can provide up to 540W each pair, and they are user selectable by using a switch inside the case; when one pair is set to active, the other pair is not available. Rubber port caps are included to protect the 3-pin and 4-pin XLR outputs.
The outer case is rated IP67 waterproof, it features a heavy-duty handle and latches, has reinforced corners, and it has an automatic air pressure valve. Four 65W AC chargers are included to provide charging for your batteries as well as power redundancy.
Power Input | 1 to 4 x Gold Mount Battery Plates (Batteries are Hot Swappable) |
Power Output | Outside: 2 x 48 V 3-Pin XLR, Max. 560 W (Paired, User Selectable) 2 x 28 V 3-Pin XLR, Max. 560 W (Paired, User Selectable) 2 x 14 V 4-Pin XLR, Max. 340 W (Paired, Always Available) Inside: 2 x 5 V USB, 3 A, 15 W Max. (Each) |
Input | Data Port for Calibration/Testing |
AC Input | 65 W, with Charger |
IP Rating | IP67 |
Display | LCD |
Dimensions | 17.1 x 14.6 x 7.6" / 43.4 x 37.1 x 19.3 cm |
Weight | 12.1 lb / 5.5 kg (without batteries) |