Support your power-hungry production equipment with this Gold mount Granite Mini 95Wh Li-Ion 2-Battery and Charger Kit from BLUESHAPE. The kit includes two Granite Mini 95Wh Gold mount lithium-ion batteries and a dual 6A travel charger.

Each battery features a 6.3Ah capacity, two D-Tap outputs for additional equipment, and status monitoring via Wi-Fi using an iOS or Android app. The dual charger features two Gold mount slots for the batteries and provides a 6A charge per battery. It also features a 14.4V 4-pin XLR power output to power accessories and serve as a UPS backup for your equipment, should its primary power fail. It can charge the batteries in less than two hours.

BLUESHAPE Dual Gold Mount 6A Travel Charger with XLR Output

The Dual Gold Mount 6A Travel Charger from BLUESHAPE allows you to charge two Gold mount batteries sequentially and features a 4-pin XLR power output. It's very convenient to use, featuring a carry handle and a rotating foot on the bottom for desktop use. This updated model of the CGTR2 charger allows you to use the XLR output as a UPS backup with a quick failover function, and it features a higher 6A simultaneous charge. It is also fanless to ensure a quiet charge. Batteries under 190Wh take less than two hours to charge, while batteries up to 290Wh can take a bit over four hours to charge to 100%.

The charger features a pop-out stand that neatly tucks away underneath when not needed. It can be powered via an included AC cable or the separately available BLUESHAPE In-Car Adapter. A data socket allows for a USB connection with a separately available 4-pin LEMO to USB cable to a computer in order to monitor charging activity and log battery data. The optional BLUESHAPE BSCVMON cable and maintenance utility are required for this, and up to four chargers can be monitored on a single computer.

This charger features a BLUESHAPE technology called IPCS (Intelligent Pre-Charge System) that allows it to provide charge at increased speeds to batteries with fast-charge supporting features, such as pre-charge protection and cell-balancing. IPCS does this by initially boosting very low voltage cells to a state at which charge can be applied with a medium-low current without causing damage. Then it charges with a 300mA current for a while, and when the battery reaches a reasonable voltage state, the charger speeds up the charging process by switching to full throttle. To counteract the increased heat caused by this fast-charging capability, the charger employs another BLUESHAPE technology called CTP (Charger Thermal Protection) that allows the electronics to work out the best possible charge profiles without causing damage, even in adverse temperature conditions.

Key Features

• 4-pin XLR power port can be used as UPS backup
• Fanless design
• Charge two batteries simultaneously at 6A
• Carry handle and extending desktop foot
• DC port supports optional BLUESHAPE in-car adapter
• Features a 4-pin data socket supporting optional computer maintenance utility
• IPCS/CTP fast charge and overheat features
• LED status indicator
• On/Off switch

BLUESHAPE Granite Mini 95Wh 3-Stud Lithium-Ion Camera Battery (6.3Ah)

The Granite Mini 3-Stud Lithium-Ion Camera Battery from BLUESHAPE is a 95Wh battery with a 6.3Ah capacity and nominal voltage capacity of 92Wh. It is designed to be used with cameras and apparatus equipped with a 3-stud gold mount type. This battery features 2.4 GHz 802.11 b/g/n Wi-Fi connectivity through a free App available for iOS and Android, called "GRANITE Link".

It has a 5-LED gauge for accurate capacity display integrated with battery safety, balancing, and monitoring technology. Two power outlets through D-Tap sockets are located on the battery sides, protected by rubber covers. Both outlets are directly connected to the battery terminals for maximum power on the D-Tap ports, and can also be used for charging using AC-DC D-Tap style chargers (available separately). This battery can be used to power devices working at a nominal voltage of 14.4V, or even USB powered gadgets and chargers through a PT-USB adapter (available separately).

Remotely check the state of charge and the remaining runtime updated in real time based on the actual load conditions

All batteries connect to the same Wi-Fi network so that one or more smartphones with the App installed can connect and receive data from all the batteries at the same time

Avoid unauthorized use of your battery packs by locking them when not in use

LED gauge and push button for capacity check

Rubberized colored gasket for shock absorption and water resistance improvement

High-endurance rubber caps for protection of the D-Tap sockets when not in use

3-stud mount fittings

Contact block can withstand high current draws up to 12A

Robust thick-walled housing made of plastic for impact resistance

10.8 to 16.8V operating voltage range

Can withstand several drops from heights up to 6.6' without suffering internal and external critical damages

IP54-rated for protection and safety of operations against dust and water