The Cartoni Master 30 Head with K701 Tripod and Mid-Level Spreader includes a Cartoni Master 30 fluid head, single-stage aluminum legs, a mid-level spreader, and three rubber feet. The head is suitable for use with heavy cine cameras as well as video cameras with box lenses. It mounts on the Mitchell plate of the single-stage aluminum legs, and the mid-level spreader prevents the legs from flying apart.

The head includes a telescoping left pan handle and a short right pan handle. The pan handles attach to the head via the integrated rosettes on either side of the head. The head pans a full 360° and tilts forward and back 90°. The legs feature secure rotating lever locks, support up to 330 pounds, and can extend from 35.5 to 68". Three individual rubber feet protect delicate or hard surfaces from the built-in foot spikes, and they can be removed when working on soft surfaces such as dirt or sand. The mid-level spreader is superior to using a ground spreader when working on uneven terrain or on stairs.

Cartoni Master 30 Flat Base Fluid Head

In broadcast and studio configurations, the Master 30 Flat Base Fluid Head from Cartoni covers the needs of video shooters using cameras weighing from 7 to 66 lb. With a low center of gravity configuration such as with teleprompter, the Master 30 can hold cameras as heavy as 88 lb. The fluid module, in both pan and tilt modes, ensures smooth movements. With accurate starts and stops, the drag system allows a wide variety from almost freewheeling in fast action movements to maximum resistance for long focal shoots.

• Counterbalance performs perfect balance at any angle from 0 to ±90°
• Operating knobs and levers are conveniently located and easy to reach with a special care for ergonomics
• Head comes equipped with dual telescopic pan bars, illuminated spirit level and digital readouts for drag control and counterbalance settings

Cartoni K701 Aluminum 1-Stage Tripod Legs (Mitchell Flat Base)

The Cartoni K701 tripod legs feature a Mitchell flat base and are designed to provide stable support for studio EFP configurations or 35mm film cameras.
Fitted with two rotary clamping mechanisms and featuring 22mm diameter tubes, this single stage version offers superior torsional rigidity and structural integrity, while the locking knobs, which include over-tightening protection, ensure maximum clamping efficiency maintained over the tripod lifetime.

• Aluminum alloy construction
• Mitchell flat base
• Single extension design
• Maximum height of 68"
• Supports up to 330.0 lb
• Film-style twist locks

Cartoni Mid-Level Spreader for 1-Stage Studio Tripod

The Cartoni Mid-Level Spreader for 1-Stage Studio Tripod is compatible with Cartoni 1-stage studio tripod legs.

Cartoni Pivoting Rubber Feet for Studio Tripods (3-Piece Set)

The set of 3 Pivoting Rubber Feet from Cartoni is designed for use with Studio Tripods.