Hands-on production for students is made possible and easy with this EPB-1650T Educator's Production Bundle from Datavideo. Have your students engage in multiple production roles as they capture vibrant 1080p video at award ceremonies, sporting events, graduation ceremonies, and more. The EPB-1650T Educator's Production Bundle includes the following Datavideo livestreaming and production tools: Two PTC-150TL cameras, the HS-1600T Mark II 4-Channel HD/SD/HDBaseT Portable Video Streaming Studio switcher, an RMC-180 Mark II PTZ Camera Controller, and an HC-800FS Wheeled Trolley-Style Water-Resistant Case.

Datavideo HS-1600T Mark II 4-Channel HD/SD/HDBaseT Portable Video Streaming Studio

Bring your broadcast mobile with this HS-1600T Mark II 4-Channel HD/SD/HDBaseT Portable Video Streaming Studio from Datavideo. This mobile studio utilizes HDBaseT technology to control up to three Datavideo PTZ cameras while streaming H.264 video to the web. It features three HDBaseT inputs that can control connected cameras and accept video inputs, as well as one HDMI input to add an additional video source. Three HDMI program outputs allow you to connect to monitors to display your program, one HDMI is for graphics output, and a streaming RJ45 LAN output connector lets you stream live to the Internet using a minimum Cat 6 cable. Depending on the data rate of your stream, you can also record to an optional SD card.

The HS-1600T Mark II is built into a suitcase-like form with a 17.3" TFT LCD monitor with 1920 x 1080 resolution built into the lid. The rest of the unit features all the switcher controls, including a T-bar for transitions, a joystick, audio sliders, and a host of buttons for controlling your PTZ cameras, inputs, program outputs, and streaming video. There are also 2RCA and XLR audio inputs to mix analog audio into your program.

The monitor supports multiview mode, while the HDMI and streaming output support your program output. The switcher also supports popular mix effects, including picture-in-picture, wipe, mix, and fade, and it incorporates one upstream keyer. It can also send red and green tally signals via the built-in tally connector. The built-in real-time encoder enables live streaming, and you can stream and record your program at the same time.

Applications

• Live event meeting
• Tradeshow
• Town hall
• Government event
• House of worship
• Sports
• Musical performances

Key Features

• 17.3" monitor built into the lid with a resolution of 1920 x 1080
• Supports up to Full HD 1080p
• Built-in HDBaseT technology allows for control of up to three PTC-150T/140T PTZ cameras
• Support multiple bit rates for recording to SD card and streaming function
• One-button setup for recording and streaming
• Broadcast quality H.264 network streaming over Cat 6 Ethernet cable
• Four video inputs: three RJ45 HDBaseT for cameras and one HDMI graphic input
• Pan, tilt, and zoom with speed control via joystick
• Three HDMI program video outputs
• Analog audio inputs: Two 3-pin XLRs and one L/R 2RCA pair
• Flexible mix/effects: PiP, wipe, mix, fade
• Tally output

Datavideo PTC-150TL HD/SD-SDI HDBaseT PTZ Camera (No Receiver, Black)

The black PTC-150TL HD/SD HDBaseT PTZ Camera (No HDBaseT Receiver) from Datavideo captures up to 1080p HD video and features HDBaseT technology for remotely controlling the camera via Cat 6 or above cable. Configured specifically for use with the HS-1500T HDBaseT Production Switcher, the PTC-150TL does not include an HDBaseT receiver.

PTC-150TL video capture functions include wide dynamic range, backlight compensation, and digital noise reduction for detailed imaging. Features include 30x optical zoom, 50 programmable presets, and an IR cut filter for optimal low-light performance. Adjust the camera to your choice of multiple mounting options with the help of the image mirror and rotation functions.

For multi-camera shoots, the built-in green/red tally light can be used to signal when the camera is active. Virtual studio applications benefit from the PTC-150TL's support for real-time position reporting on a per frame basis. The PTC-150TL camera supports Sony VISCA protocol for PTZ control using RS-422 interface over the unit's RJ45 port.

Features

• Capture up to 1080p HD video with wide dynamic range, and backlight compensation
• The 30x, 4.3 to 129mm, f/1.6 to 4.7 zoom lens captures detail from near or far positions
• HDBaseT compatibility enables cable video, power, control, and tally using a single Cat 6 cable, and separately available HDBaseT components
• Create up to 50 preset pan, tilt, and zoom position combinations
• An IR cut filter, and digital noise reduction enhances capture, even in low-light environments
• Auto/manual iris and white balance options enable individual calibration for multi-camera setups
• Built-in dual tally with red and green LEDs
• Compatible with the Datavideo RMC-180 camera control unit
• Day and night image-compensation functions
• Firmware updates via USB port

Datavideo RMC-180 Mark II PTZ Camera Controller

Use the Datavideo RMC-180 Mark II PTZ Camera Controller to adjust the focus, iris, zoom, and other settings of up to four PTZ cameras via RS-422 and VISCA protocols in live event or conference applications. One main joystick and various knobs and buttons allow for easy setup and control of connected cameras through four RJ45 inputs. Four shortcut keys per camera can be programmed into position presets for effects like close-ups and wide shots.

Plug-and-Play Interface

Connect your compatible PTZ camera units to the RMC-180 via four RJ45 inputs on the back panel. The ports feature RS-422 interface standards and are compatible with any RJ45 cable. VISCA protocols can also be utilized by the unit. The status of the controls can be viewed via the monochrome panel display, and firmware updates can be achieved via the USB-A input.

Multicamera Control

An ergonomic joystick and tactile button layout make for easy setup and control of up to four Datavideo PTZ cameras and robotic pan/tilt heads for any live production scenario.

Camera Position Presets

Shortcut keys on the RMC-180 control panel can save up to four preset positions for each connected camera (up to eight presets if only two cameras are connected). Program close-ups and wide shots, and recall them with the press of a button.

Manual Controls

Control each camera's focus and iris manually using the embedded dials. Other manual settings include pan, tilt, zoom, gain, and OSD functions on specific models. Commands are delivered via Cat 5/6 cable.

Speed Mode

The controller can move the PTZ cameras at slow, medium, and fast speeds. Select the speed of your camera movement with the quick option buttons to match the pacing of your event.

Tally Light Support

A DB-15 tally input port on the control unit allows for compatibility with Datavideo's switcher and camera tally indicators. Two different modes—tally user and tally input—can be implemented to suit your workflow.

Controls PTR-10 with Presets

The same four presets per camera can be used to control the PTR-10 robotic pan/tilt head. Iris and focus control extend to the mounted camera on the head.

Datavideo Wheeled Trolley-Style Water-Resistant Case for 3 PTZ Cameras (XXL)

The XXL Wheeled Trolley-Style Water-Resistant Case for 3 PTZ Cameras from Datavideo features a pre-cut foam that holds three PTC-140 or PTC 150 cameras and cables. This allows you to safely nestle your cameras, cables, and accessories into the case. The case is a trunk-shaped, hard-shell case that is water-, dust-, and crush-resistant. Integrated padlock inserts and rubber seals provide additional security. You can wheel the case along using the retractable handle or grasp it using the large, hinged top handle.

Features

• Trunk-style wheeled case with a custom-cut foam interior, a retractable handle, and a hinged top handle
• Water-, dust-, and crush-resistant hard case with rubber seals and padlock inserts