The Miller CiNX 3 Fluid Head with SOLO 100 3-Stage Tripod is a compact and lightweight tripod system that brings smooth yet precise pan and tilt control to cameras and rigs weighing up to 41.8 pounds. It features the DCiNX 3 fluid head, carbon fiber legs, a carry strap, and a tripod bag for storing and carrying all your gear.
The head features a sliding balance plate, independent pan and tilt locks, five steps plus zero setting for both pan and tilt drag, 16 settings of counterbalance, a precision bubble level, and an integral 100mm ball for leveling. The included Solo carbon fiber legs feature three stages, providing the system with a height range of 16.6 to 81.5", while selectable leg angle locks ensure rapid setup and excellent stability without a spreader. The 100mm bowl allows for quick leveling, optimum torsional rigidity, and long-term durability. An included strap helps you sling your system over your back for quick moves between locations, while an included carry bag protects your gear during transport or storage.
Miller CiNX 3 Fluid Head
The Miller CiNX 3 Fluid Head is designed with a strength-to-size ratio that provides an optimal solution for the supported load capacity of 2.2 to 41.8 lb. The CiNX 3 features a 3/8"-16 threaded flat base and includes a 100mm bowl claw adapter; optional 150mm bowl or Mitchell base adapters from Miller are also supported.
The CiNX 3 head features 16 steps of counterbalance and 6 steps of pan and tilt fluid drag. The drag and counterbalance systems offer progressive and equal increments of drag and torque to ensure ultra-soft starts and stops and balanced diagonal transitions. The pan/tilt controls and a bubble level are all illuminated at the press of an illumination button. The CiNX 3 comes with a GP23A type battery already installed for illumination but supports multiple other types as you will find in the user manual.
For ultimate efficiency with heavy cameras, the CiNX 3 has a sideload camera plate platform with a safety lock, and it comes with an ARRI-type camera plate that can be adjusted approximately 6". It also includes a rosette-mount telescopic pan handle while supporting two in total for dual-handed operation. On the sides, it provides four anti-twist ARRI accessory mounts. The head is made of lightweight yet high-strength die-cast aluminum and rigid composite polymers. It's finished with a durable black ripple and anti-corrosive pretreatment. It also has water- and dust-resistant sealing.
The head also has a very wide operating temperature range of -40 to 149°F.
Key Features
Miller 1520 Solo DV Strap - for Miller Solo DV Tripods
The Miller 1520 Solo DV Strap is a padded tripod carry strap designed for the Miller Solo DV series tripods.
Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.
Camera Plate
Camera Plate Features | Quick Release |
Camera Plate Type | Sideload Plate |
Camera Mounting Screw | 2 x 3/8"-16 Male |
Balance Plate Sliding Range | 5.91" / 150 mm |
Safety Lock | Yes |
Plate Dimensions | 10.24 x 3.76 x 0.46" / 260 x 95.5 x 11.7 mm |
Head
Base Mount | 100 mm Half Ball 3/8"-16 Female |
Counter Balance | Incremental 15-Step Plus 0 |
Pan Handle Fittings | 2 x Rosette |
Bubble Level | 1 x Illuminated |
Accessory Mounting | 4 x ARRI Accessory Mount Female |
Pan & Tilt
Drag Control | Pan: Stepped 5-Step Plus 0 Tilt: Stepped 5-Step Plus 0 |
Drag Type | Fluid |
Vertical Tilt | +90° to -75° |
Panning Range | 360° |
Independent Pan Lock | Yes |
Independent Tilt Lock | Yes |
General
Load Capacity | 2.2 to 41.8 lb / 1 to 18.96 kg |
Operating Temperature | -40 to 149°F / -40 to 65°C |
Weight | 8.4 lb / 3.81 kg |
Packaging Info
Package Weight | 15.65 lb |
Box Dimensions (LxWxH) | 18.2 x 14.3 x 12.4" |
Attachment Method | Spring-Loaded Clasp |
Shoulder Strap Length | 31 to 43" / 78.7 to 109.2 cm |
Strap Width | 1.5" / 3.8 cm |
Material | Nylon |
Packaging Info
Package Weight | 0.7 lb |
Box Dimensions (LxWxH) | 7 x 5.6 x 5.2" |
Material | Ballistic nylon outer shell |
Type of Closure | Zipper |
Padded | Yes |
Carrying/Transport Options | Dual top handles and padded end handle D-links for optional, user-supplied shoulder strap Back pack straps |
Dimensions | 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm |
Weight | 9.7 lb / 4.4 kg |
Packaging Info
Package Weight | 12.68 lb |
Box Dimensions (LxWxH) | 39 x 13.75 x 12" |