The Rycote INV-2 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The entire mount is comprised of two low-profile InVision lyres with a 20mm (0.78") clip at the front, and 9.5mm (0.37") rear clip. The lyres rest on a bar with a 3/8" threaded stand adapter at the base.

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The 20mm and 9.5mm mounting clips included with this system are intended for mounting remote cabled microphones such as the Rode NT6 and Sennheiser MKH8000.

InVision Lyre Suspension

The small InVision lyre suspension webs measure 42mm high and 40mm wide. The small, low-profile design is ideal in broadcasts, recording applications, etc.

20mm and 9.5mm Clips

The 20mm and 9.5mm mounting clips included with this system are intended for mounting remote cabled microphones such as the Rode NT6 and Sennheiser MKH8000.

Hytrel Construction

The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

Integrated 3/8" Threaded Stand Adapter

A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.