The Sennheiser CHG 70N + PSU KIT is a network-enabled charger with two bays, capable of simultaneously charging up to two EW-DX SKM handheld and/or EW-DX SK bodypack transmitters with their respective BA 70 batteries inside. It can also recharge standalone BA 70 batteries. The Charger features an RJ-45 network socket that supports the Media Control Protocol to provide remote control and status monitoring via the Sennheiser Control Cockpit software or a third-party application.
The CHG 70N operates on Power over Ethernet (PoE IEEE 802.3af Class 0) or on 12 VDC input voltage supplied from the EW-D POWER SUPPLY (included). Up to five chargers can be daisy-chained with only one PoE network connection or power supply needed—allowing you to recharge up to ten battery packs or transmitters at the same time.
Charging time for a full charge is approximately 3.5 hours (2 hours for 80% charge). A colored LED at each charging bay indicates charge status.
Quantity | 1 |
General
Compatibility | Sennheiser EW-DX SK Sennheiser EW-DX SKM, SKM-S Sennheiser BA70 |
Power
Power Source | AC Adapter with Power Brick (Included), PoE |
Power I/O | 1 x Barrel Input |
Center Tip Polarity | Not Specified by Manufacturer |
DC Input Power | 12 VDC at 3.5 A |
Maximum Power Output | Not Specified by Manufacturer |
Environmental
Operating Humidity | 95% (Non-Condensing) |
Charging Temperature | 14 to 122°F / -10 to 50°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Physical
Dimensions | 7.9 x 4.6 x 4.1" / 200 x 116 x 104 mm |
Weight | 1.4 lb / 640 g |