Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)

Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)

Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)

  • SKU : #CXALMKE 1-4-M | MFR : #MKE 1-4-M | UPC : #615104170612
Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)
Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)
Features
  • Paintable Surface
  • Miniature 3.3mm Capsule
  • Omnidirectional Polar Pattern
  • 3-Pin Lemo Connection
  • Reduced Sensitivity
  • Moisture Resistant

Special Order - Order now and we'll deliver when available - Normally ships in 2-3 weeks or less

You Pay:
AED 1,726.31
VAT Excl.

Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)

The Sennheiser MKE1 Miniature Lavalier Microphone is their smallest, professional lavalier microphone to date. Measuring just 3.3mm (0.12") in diameter, the MKE1 is well suited for placement in hair, the body, clothing, accessories, props, etc.

Audio signal is reproduced transparently, while maximum intelligibility of speech and vocals is achieved with its omnidirectional polar pattern and wide frequency response.

The Kevlar reinforced cable is rugged and minimizes surface noise. The MKE1's moisture resistant enclosure protects against damage caused by moisture, making it well suited for actors, performers and broadcast applications.

  • 3-pin Lemo Connector
  • Great strengths - small microphone
  • Very small dimensions (3.3mm capsule diameter)
  • High maximum sound pressure level (142dB)
  • Very high speech intelligibility; clear, pleasant treble
  • Full, natural sound with low ambient noise
  • Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
  • Very sweat-resistant due to protective membrane
  • Flexible tubes for attaching the microphone with clips or adhesive tape

IN THE BOX

    • Sennheiser MKE1 - Professional Lavalier Microphone (Beige Paintable Surface)
    • MKE 1 Clip-on Microphone
    • MZC 1-1 Small Frequency Response Cap
    • MZC 1-2 Large Frequency Response Cap
    • 3 x Make-up Protection Caps
    • Limited 1-Year Manufacturer Warranty
TransducerCondenser
Polar PatternOmnidirectional
Frequency Response20Hz to 20kHz +/- 2.5dB
Dynamic Range (Typical)Not Specified By Manufacturer
Signal-to-Noise RatioEquivalent noise level 27dB
Equivalent noise level 39dB
Maximum Input Sound Level142dB
Power Requirements4.5 - 15V
Output Impedance1k Ohm (Nominal)
4.7k Ohm (Min. Terminating)
Output Connectors3-pin Lemo
PadNo
Low Frequency Roll-OffNo
DimensionsCapsule: 0.12" (3.3mm) Diameter
Cable Length: 5.24' (1.6m)
Cable Diameter: 0.03" (1.0mm)
Weight0.004 oz (0.1g)

Packaging Info

Package Weight0.15 lb
Box Dimensions (LxWxH)6 x 3.3 x 0.6"