Designed for production use in the field—and boasting a powerful feature set even by the standard of Sound Devices—the Scorpio is a 32-channel, 36-track, Dante-enabled portable field mixer and recorder with a panoply of connections. Indeed, the Scorpio is the flagship sound-recording device in Sound Devices' production line.
Boasting 16 high-quality preamps, 32 channels of Dante I/O, 12 analog outs, 12 buses AES I/O, and a whole long more, the Scorpio was built to be as ergonomic as it is powerful. You'll find one- or two-button accessibility to most menu options and one-handed control over many menu shortcuts. Power the device with L-mount batteries, or use the TA4 DC inputs with smart batteries, inline power supplies, or NP-1 batteries. The Scorpio even gives you a built-in dual L-mount battery charger.
The Best Pres Sound Devices Has to Offer
16 high-quality, low-noise preamps are on hand right from the device, accepting inputs over XLR, TA3, and TA5 connections. These preamps outperform all previous Sound Devices pres by any measurable spec. All of them provide 3-band EQs, analog limiting, high-pass filters, adjustable delays, and phantom power.
All the I/O You Need
Need 32 channels of Dante in and out? The Scorpio is equipped for that. It also handles AES I/O and gives you 12 analog outputs. Multiple headphone outs are on hand to suit any kind of situation. Even communication headsets can be accommodated.
Complex Internal Routing
Use the Scorpio to mix up to 12 individual buses, all in a compact form factor that works equally well in an over-the-shoulder rig or a mobile environment. With an onboard engine that makes use of three FGPA circuits and six ARM processors, the Scorpio can handle complex routing schemes, pushing audio through its 64-bit engine to ensure a high-quality sound for your demanding, in-the-field needs.
Built-In Recording Storage
The Scorpio boasts a 256GB internal SSD for recording audio straight to the device, though two SD card slots are on hand for redundancy. Simultaneous recording is supported—though that, of course, might be redundant to say.
Timecode for Time Cops & Time Bandits Alike
The accurate, onboard timecode generator boasts its own battery to hold timecode for up to four hours after you power off the device.
More Features at a Glance
32 channels, 12 buses, and 36 tracks
Multiple headphone outputs
I/O for comm headsets in addition to headphones
Easy-to-read metering
Onboard EQ, high-pass filtering, and limiting
Rugged design for durability
USB control surface support via MCU
SuperSlot support for Shure ADX5D receivers when connected via separately available SL-6
Portable Recorder
Number of Tracks | 36 (32 Inputs + Stereo Mix) |
Maximum Sampling Rate | 192 kHz / 24-Bit |
Microphone | Built-In Slate Mic |
Number of Microphone Preamps | 16 Preamps |
Built-In Speaker | No |
Display | 4.2" / 10.7 cm Color LCD |
Memory Card Support | SD |
Internal Storage | 256 GB |
Recording
Audio File Formats | BWF, WAV |
Sample Rates | AAC/WAV: 44.1 / 47.952 / 48 / 48.048 / 88.2 / 96 / 192 kHz |
Bit Depth | 16 / 24-Bit |
Bit Rates | 32 to 256 kb/s |
Signal Processing & FX | Compressor, Delay, EQ, Limiter, Low-Cut Filter |
Timecode Support | Yes |
Frame Rates Supported | 23.98 / 24 / 25 / 29.97 / 29.97 DF / 30 / 30 DF |
Clock Accuracy | 0.1 ppm / 0.25 Frame per 24 Hrs |
Connectivity
Analog I/O | 6 x XLR 3-Pin Female Active-Balanced Line/Mic Input 2 x TA3 3-Pin Male Active-Balanced Line/Mic Input (Lockable) 4 x TA5 5-Pin Male Active-Balanced Line/Mic Input (Lockable) 1 x TA5 5-Pin Male Balanced Mic Input (Lockable) 2 x XLR 3-Pin Female Active-Balanced Line/Mic Output 2 x Hirose 10-Pin Female Balanced Line/Mic Output 6 x TA3 3-Pin Male Balanced Line/Mic Output (Lockable) 1 x 1/8" / 3.5 mm TS Female Unbalanced Headphone Output 1 x TA5 5-Pin Male Active-Balanced Headphone Output (Lockable) |
Digital I/O | 2 x XLR 3-Pin AES3 Output 1 x Hirose 10-Pin Output 2 x RJ45 Dante In/Out |
Phantom Power | +12 / 48 V, Selectable On/Off (Applied to All Inputs) |
Phantom Power Current | 10 mA per Channel |
System Connection | 1 x USB-C (3.0 / 3.1/3.2 Gen 1) 1 x USB-A (Control) |
Bluetooth | Bluetooth (Remote) |
Performance
Frequency Response | 10 Hz to 80 kHz |
Gain/Trim Range | Mic Inputs: +12 to +76 dB Line Inputs: -14 to +50 dB Headphone Outputs: Up to 20 dB |
Max Input Level | Mic Inputs: +8 dBu Line Inputs: +28 dBu |
Max Output Level | Line Outputs: +20 dBu Headphone Outputs: +14 dBu |
Headphone Output Power | 400 mW per Channel |
Dynamic Range | A/D Converters: 120 dB |
Impedance | Inputs: 4 Kilohms (Mic Level) 4 Kilohms (Line Level) 1/8" / 3.5 mm Inputs: 8 Kilohms Outputs: 250 Ohms (Mic Level) 120 Ohms (Line Level) 3.2 Kilohms (-10 dBV) 1.8 Kilohms (Unbalanced) |
THD+N | Inputs: 0.005% |
EIN | -129 dBu (A-Weighted) |
Power
Power Options | Battery, AC/DC Power Adapter |
Battery Type | 2 x L Series (Not Included) |
AC/DC Power Adapter | 10 to 18 VDC (Included) |
Physical
Operating Temperature | 12 to 92°F / -20 to 60°C |
Storage Temperature | -40 to 185°F / -40 to 85°C |
Operating Humidity | 90% (Non-Condensing) |
Dimensions | 12.6 x 2 x 8.1" / 32 x 5.1 x 20.5 cm |
Weight | 5.7 lb / 2.6 kg (without Batteries) |