The CD-200BT Rackmount CD Player With Bluetooth Receiver from TASCAM allows you to playback CDs, CD-Rs, CD-RWs, and WAV, MP2 and MP3 data CDs in addition to audio from Bluetooth enabled devices. While you can only pair one Bluetooth device to the CD-200BT at a time, you can register up to 8 devices, allowing you to switch between them quickly. Bluetooth is only available to analog outputs and will not transmit via digital coaxial or optical outputs.
The CD drive itself is designed and built by TEAC and features a 10-second shockproof memory, keeping your playback protected from vibrations and CD skips. The CD-200BT also has an auxiliary 3.5mm stereo mini-jack input for integrating another sound source. The unit has a variety of output options including stereo analog RCA outputs and digital coaxial and optical outs. A front-panel 1/4" headphone output with independent volume control allows you to use the CD-200BT for personal listening. The unit can be controlled with the included remote control and is rackmountable with the included rackmount screw kit.
Wireless Playback from Bluetooth Devices
Through the antenna located in the front of the CD-200BT, audio file playback signals can be received from a variety of Bluetooth compatible devices. The types of files that can be played back depend on the transmitting device; so any file type that can be played back by iTunes, Windows Media Player, smartphone player apps and other music applications can be played through this unit. Bluetooth playback uses a wireless connection, so no new wiring is necessary to use compatible audio sources as long as they are in signal-range, allowing easy and speedy playback
Device Selection Function
Bluetooth playback requires pairing. Normally, pairing is one to one, but the CD-200BT has a device selection function that can be used to pair with multiple transmitting devices. By registering devices to be used in advance, you can switch smoothly between transmission devices for playback with minimal connection interruption time (only one device can be used for playback at a time). In addition, since the name of the transmission device currently being used for audio playback can be shown on the display, you can check the connection status within this unit
A2DP Playback
A variety of different profiles are used for Bluetooth transmission depending on the application. The CD-200BT supports the A2DP (Advanced Audio Distribution Profile) for music playback, and SBC (Sub Band Codec), a standard A2DP codec. In addition, it supports the aptX codec, making high quality wireless audio playback possible. The aptX codec also has an error recovery function, so audio is much less likely to be interrupted, compared to ordinary SBC transmission
CD Drive Designed and Built by TEAC
The CD-200BT's CD drive is designed by TEAC
10-Second Shockproof Memory
The 10-second shockproof memory prevents skipping from vibration and other causes. Data stored in the player's memory can be played back without skipping, preventing undesired interruptions
Additional Features
Performance
Frequency Response | 20 Hz to 20 kHz ± 1 dB |
Dynamic Range | >90 dB |
Max Input Level | -20 dBV |
Max Output Level | -10 dBV |
I/O Impedance | 1/4" Output: 32 Ohms 1/8" / 3.5 mm Input: 22 Kilohms Output: 200 Ohms |
Signal to Noise Ratio | >90 dB |
Maximum Sampling Rate | 48 kHz / 16-Bit |
Total Harmonic Distortion (THD) | <0.01% |
Bit Rates | 32 to 320 kb/s + VBR |
Connectivity
Audio I/O | 1x 1/8" / 3.5 mm Input 1x RCA Output 1x TOSLINK S/PDIF Output 2x RCA |
Video I/O | No |
USB I/O | No |
Network I/O | No |
Control I/O | No |
Wireless | Bluetooth 3.0 |
Bluetooth | 3.0 |
Supported Bluetooth Profiles | A2DP AVRCP |
Compatibility
Supported Disc Types | CD, CD-DA, CD-R, CD-RW, Mini-CD |
Audio File Formats | MP2, MP3, WAV |
Supported Audio Codecs | AAC, SBC, aptX |
Digital Media Slot | No |
General
Power Consumption | 11 W |
AC Input Power | 120 to 240 VAC, 50 / 60 Hz |
Operating Temperature | 41 to 95°F / 5 to 35°C |
Packaging Info
Package Weight | 12.25 lb |
Box Dimensions (LxWxH) | 22 x 15 x 7" |