The Camera Cage Kit C for the Panasonic BGH1 features the minimalist Tilta cage for the camera, a 15mm LWS baseplate with rods, and an L-series powered right-side Nucleus-Nano focus handgrip, which attaches to the NATO rail of the cage via an included quick release adapter. An optional Type V adapter is available from Tilta for attaching the grip to the cage's right rosette mount.
Also included are an EF lens mount adapter, a tension-adjustable monitor mount for the cage's top shoe mount, and Arca and Manfrotto adapter plates. A Nucleus Nano run/stop cable is supplied, as well as an HDMI cable and a cable clamp. Also, a compact single 15mm rod holder is included that can be screwed onto different locations on the cage, so you can add a rod-mount motor or other accessory.
Tilta Full Camera Cage for Panasonic BGH1/BS1H (Black)
In a minimalist form that attaches mainly around the front of the camera, allowing for a sleek look and lightweight design, Tilta's Full Camera Cage for Panasonic BGH1/BS1H packs three shoe mounts, two NATO rails, two rosettes, and two ARRI anti-twist threads. Besides these, there are standard 1/4"-20 and 3/8"-16 accessory threads and seven tripod mount threads for optimal placement on a gimbal. An adapter is also included for attaching the cage to an optional 15mm LWS baseplate from Tilta for rod support and further expanding the cage.
One cold shoe is provided on top for top handles and one on each side arm. Each of the side arms also features one of the NATO rails, ARRI M6 handgrip rosettes, and 3/8"-16 anti-twist threads.
Tilta 15mm LWS Baseplate for RED KOMODO Cage (Black)
The Tilta 15mm LWS Baseplate for RED KOMODO Cage, in black, attaches to the Tilta Cage for RED KOMODO via an optional Tilta RED KOMODO Adapter Plate. It attaches to the cage by quick release via the adapter plate, and it provides 15mm LWS rod support for accessories such as a follow focus and matte box. Rods are sold separately.
(The Tilta Full Camera Cage for RED KOMODO already includes the required adapter plate.)
Tiltaing Right-Side Advanced Focus Handle with Run/Stop (F570, Black)
Designed for Tiltaing camera cages, the Right-Side Advanced Focus Handle, in black, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.
The handle attaches to the right side of your Tiltaing cage using your choice of an optional dedicated Right Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.
The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.
There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.
Tilta Advanced Right-Side Handle Adapter Type IV (Black)
The Advanced Handle Adapter Type IV from Tilta enables you to attach a Tiltaing Right-Side Wooden Handle to select Tilting camera cages. This black Type IV adapter features a locking NATO rail mount and is constructed of aluminum and stainless steel.
Compatibility
Tilta Adjustable Cold Shoe Accessory Mounting Bracket (Black)
Made of robust aluminum and stainless steel, Tilta's Adjustable Cold Shoe Accessory Mounting Bracket, in black, is used to attach a monitor or other accessory to a camera's hot shoe or a camera cage shoe mount. Featuring tension-based tilt adjustment and a separate thumbwheel for the top 1/4"-20 screw and bottom cold shoe, the bracket allows for efficient, tool-free attachment and adjustment of your accessories. The mounting platform is padded and also has an edge lip to better hold your accessory and prevent twisting and scratching.
Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Black)
Custom build your Tiltaing camera rig with this Arca-Swiss–compatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.
Note: Not compatible with the Tiltaing BMPCC 4K/6K cage.
Compatibility
Note: Not compatible with the Tiltaing BMPCC 4K/6K cage
Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Black)
Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.
Note: Not compatible with the Tiltaing BMPCC 4K/6K cage.
Compatibility
Note: Not compatible with the Tiltaing BMPCC 4K/6K cage
Tilta HDMI Cable Clamp for Panasonic Lumix DC-BGH1 Full Cage (Black)
The HDMI Cable Clamp for Panasonic Lumix DC-BGH1 Full Cage, in black, attaches directly to the Tilta cage with included screws and allows you to secure your HDMI cable connector to prevent accidental disconnections.
Tilta HDMI Extension Cable for Tiltaing Camera Cages
This HDMI Extension Cable from Tilta is primarily designed to connect to your camera inside your Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. Simply plug the male HDMI end into the camera, and connect your display's HDMI cable to the female port of this extension cable. It is also compatible with Tilta's HDMI cable clamps for security.
Tilta Nucleus-Nano Run/Stop Cable for Sony FS7/FS5, URSA, EVA1, Z CAM Cameras
Use this Nucleus-Nano Run/Stop Cable from Tilta to connect your Sony FS7/FS5, Blackmagic Design URSA, Panasonic EVA1, or Z CAM camera to the control port of the Nucleus-Nano motor to control run/stop operation. The cable has a right-angle Nucleus-Nano control connector on one end and a right-angle LANC connector on the camera end.
Note: The run/stop cables Tilta offers for their wooden handles ARE NOT compatible with the Nucleus-Nano since the engineering and pin configurations are completely different. The wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-Nano. Only use cables that have been developed by Tilta exclusively for the Nucleus-Nano system.
Tilta 15mm Bottom Single-Rod Holder for Select Tiltaing Full or Half Cages (Black)
Add a 15mm rod clamp to the bottom of your Tiltaing BMPCC 4K half or full cage with this black 15mm Bottom Single-Rod Holder for Select Tiltaing Full or Half Cages from Tilta. Once attached, the rod holder allows you to mount a 15mm rod (not included) onto your cage for mounting optional accessories such as a lens motor or lens light.
The holder attaches to your cage with a screw, and it has a locating pin that helps prevent the holder from rotating without overtightening it on your cage. Though designed to attach to the bottom of Tiltaing BMPCC 4K full and half cages, the holder is also compatible with other Tiltaing cages with 1/4"-20 screw mounting and locating pin divot. Made from aluminum alloy with a black finish and stainless steel, this rod holder is an excellent option for adding a 15mm rod clamp to your camera's cage.
Tilta Threaded 15mm Rod (Black, 8", Single)
Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.
Tilta EF Mount Adapter Support for Panasonic BGH1 Cage (Black)
The EF Mount Adapter Support, in black, attaches to the front of the Tilta camera cage for the Panasonic BGH1 to provide support for an EF lens mount adapter. The attachment screw holes are slotted to allow a bit of vertical adjustment for compatibility with virtually all adapters. A support screw is also included that can be secured to the bottom of compatible adapters.
Support Type | Cage |
Grip Type | None |
Mounting
Battery Plate Type | None |
Accessory Mounting | Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread, 2 x ARRI Anti-Twist 3/8"-16 Thread |
Tripod Mounting | 1/4"-20 Thread, 3/8"-16 Thread |
Shoe Mounting | 3 x Cold Shoe |
Rosettes | 2 x ARRI Rosette w/ M6 Thread |
Rail Mounting | 2 x NATO Rail |
General
Materials | Aluminum, Steel |
Dimensions | 4.8 x 4.4 x 2.5" / 121 x 111 x 64 mm |
Weight | 0.5 lb / 230 g |
Packaging Info
Package Weight | 0.715 lb |
Box Dimensions (LxWxH) | 7.2 x 6.1 x 4.1" |
Mounting
Rod Standard | 15 mm LWS / 60 mm Spacing |
Accessory Mounting | None |
Tripod Mounting | 1/4"-20 Thread, 3/8"-16 Thread |
Shoe Mounting | None |
Rosettes | None |
General
Support Type | Baseplate |
Grip Type | None |
Materials | Aluminum, Steel |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.72 lb |
Box Dimensions (LxWxH) | 5.4 x 4.3 x 2.8" |
Mounting
Attachment Method | Attaches via Screw (Unspecified Type) |
Shoe Mounting | None |
Rosettes | None |
Rail Mounting | None |
General
Inputs/Outputs | 1 x USB-C (8 VDC) 1 x DC Barrel (12 VDC) |
Materials | Aluminum, Rubber, Steel |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Physical
Item Type | Right-Side Handgrip |
Built-In Controls | Remote Trigger, Focus Control |
Packaging Info
Package Weight | 0.605 lb |
Box Dimensions (LxWxH) | 5.6 x 4.5 x 2.8" |
General
Compatibility | Tilta Advanced Side Handle |
Physical
Mounting | 1 x NATO Rail Clamp |
Color | Black |
Material of Construction | Aluminum Alloy, Stainless Steel |
Dimensions | 1.8 x 1.6 x 0.5" / 45.3 x 40.4 x 13 mm |
Weight | 1.01 oz / 28.62 g |
Packaging Info
Package Weight | 0.08 lb |
Box Dimensions (LxWxH) | 4.65 x 3.2 x 0.65" |
Top Mount | 1/4"-20 Male |
Bottom Mount | Cold Shoe |
Material of Construction | Aluminum, Stainless Steel |
Packaging Info
Package Weight | 0.125 lb |
Box Dimensions (LxWxH) | 4.05 x 2.65 x 1.25" |
Materials | Aluminum Alloy, Stainless Steel |
Dimensions | 4 x 4 x 3" / 10.2 x 10.2 x 7.6 cm |
Weight | 3.2 oz / 91 g |
Packaging Info
Package Weight | 0.1 lb |
Box Dimensions (LxWxH) | 3.4 x 2.75 x 0.45" |
Materials | Aluminum Alloy, Stainless Steel |
Dimensions | 4 x 4 x 3" / 10.2 x 10.2 x 7.6 cm |
Weight | 3.2 oz / 91 g |
Packaging Info
Package Weight | 0.06 lb |
Box Dimensions (LxWxH) | 3.6 x 2.8 x 0.6" |
Material of Construction | Aluminum, Stainless Steel |
Packaging Info
Package Weight | 0.045 lb |
Box Dimensions (LxWxH) | 3.5 x 2.4 x 0.5" |
General
Connector 1 | 1 x HDMI Male |
Connector 2 | 1 x HDMI Female |
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 6 x 4 x 0.01" |
Material of Construction | Plastic, Rubber, Stainless Steel |
Compatibility | Sony FS7/FS5, URSA, EVA1, Z CAM Cameras |
Connectors | Nucleus-Nano Motor Control Connector Right-Angle LANC |
Length | Not Supplied by Manufacturer |
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 5 x 4 x 0.05" |
General
Material of Construction | Aluminum Alloy Stainless Steel |
Weight | 0.71 oz / 20 g |
Packaging Info
Package Weight | 0.09 lb |
Box Dimensions (LxWxH) | 4.15 x 2.4 x 1.45" |
Diameter | 15 mm |
Length | 7.87" / 200 mm |
Material | Aluminum |
Thread Type | Female / Female |
Number of Rods | 1 |
Packaging Info
Package Weight | 0.15 lb |
Box Dimensions (LxWxH) | 8 x 5 x 0.2" |
Material of Construction | Aluminum, Stainless Steel |
Packaging Info
Package Weight | 0.085 lb |
Box Dimensions (LxWxH) | 4.5 x 2.45 x 0.55" |