Featuring a Tilta Gray finish and a variety of mounting options, this Tiltaing Camera Cage Kit C from Tilta is designed to provide protection and accessory mounting for your Canon EOS 5D, 5D Mark II, 5D Mark III, 5D Mark IV, 7D, or 7D Mark II camera. The kit includes a full camera cage, a quick release top handle with multiple mounting options, Arca-type and Manfrotto-type plates, a baseplate, two 15mm rods, a 15mm single rod holder, a side focus handle, and a run/stop cable.

The cage features multiple 1/4"-20 and 3/8"-16 threads and three shoe mounts for accessories. The top handle also features two additional shoe mounts, multiple 1/4"-20 and 3/8"-16 threads, and a 15mm rod port. The bottom plate features multiple mounting holes for attaching to a tripod, shoulder rig, or gimbal. The cage mounts onto the baseplate and the included Arca-type and Manfrotto-type quick release plates can be used to mount the rig onto a tripod. The two 15mm rods connect to the baseplate, expanding your accessory options.

The side focus handle features a slot for an NP-F570 battery to power your camera or peripherals, as well as a run/stop button and cable for camera control. It also features a focus wheel that can be used with the Nucleus-Nano lens focus system.

Tilta Full Camera Cage for Canon EOS 5D and 7D Series (Tilta Gray)

This Tilta gray Full Camera Cage from Tilta is a formfitting aluminum cage that protects your Canon 5D, 5D Mark II, 5D Mark III, 5D Mark IV, 7D, or 7D Mark II camera during production without impeding access to your camera's functions, displays, ports, or battery. The camera is secured in the cage using a 1/4"-20 mounting screw.

Three integrated shoe mounts provide convenient attachment points for articulating arms, lights, external monitors, and other accessories. Your camera mounts onto the cage using the included quick release mounting plate, which allows you to quickly mount and unmount the camera. The cage also incorporates multiple 1/4"-20 and 3/8"-16 threads around the sides for attaching accessories. Multiple 1/4"-20 threads on the bottom of the cage allow you to attach a variety of baseplates, such as Tilta's Manfrotto- or Arca-type plates.

Key Features

Compatible with Canon 5D, 5D Mark II, 5D Mark III, 5D Mark IV, 7D, and 7D Mark II cameras

Retains access to ports, battery, and display

Multiple 1/4"-20 and 3/8"-16 accessory threads

Three integrated shoe mounts

1/4"-20 camera mounting screw

1/4"-20 tripod mounting threads on the bottom

Quick release mounting plate

Hand strap included

Aluminum and stainless steel construction

Comes in Tilta gray color

Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Tilta Threaded 15mm Rod (Black, 8", Single)

Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.

Lightweight anodized aluminum construction

The chamfered end eases mounting of rod-based accessories

Both ends are threaded for extending the length of the rod

Tilta 15mm Bottom Single Rod Holder for BMPCC 4K Full or Half Cage

Mount a 15mm rod onto the bottom of your Blackmagic Pocket Cinema Camera 4K cage or half cage with this lightweight 15mm Bottom Single Rod Holder from Tilta. The aluminum and stainless steel rod holder attaches to the cage bottom with the included mounting screw, and a hex screw is used to tighten the holder around the rod.

Tiltaing 15mm LWS Baseplate Type II (Tilta Gray)

This Tilta gray Tiltaing 15mm LWS Baseplate Type II from Tilta features two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Panasonic GH5 series, Fuji XT3/4, Nikon Z6/Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4"-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair of LWS 15mm rod clamps with spring-loaded locking levers.

Compatibility

Tiltaing half and full camera cages for:

• Panasonic GH series
• Fuji XT3/4
• Nikon Z6/Z7
• Sony a6/a7/a9

Tiltaing Side Focus Handle Type III (NP-F570, Tilta Gray)

Pair the versatile Tiltaing Side Focus Handle Type III from Tilta with a Nucleus Nano motor for fingertip focus control and with a separately available Nucleus Nano R/S cable for a record start/stop button with compatible cameras. Powered by a separately available Sony NP-F570 L-series type battery, this Tilta gray handle slides onto the base of a half or full Tiltaing camera cage.

This cage component features a knurled focus wheel, an 8V micro-USB output, a 12V barrel output, and a rubberized surface for a secure grip.

Compatibility

Tiltaing camera cages for Sony a7/a9, Canon 5D, and Panasonic S1
Nucleus Nano focus motor
Sony NP-F570 L-series battery