Protect and ready your Panasonic GH4, GH5, or GH5S camera for accessories with the dedicated Tilta Gray Tiltaing Cage Kit B for Panasonic GH Series from Tilta. This formfitting full-frame cage kit includes a quick release top handle, an F570 side power handle with run/stop capability, a run/stop cable, an HDMI male-to-female cable, an HDMI cable clamp, an HDMI and R/S cable clamp, and both Arca-Swiss- and Manfrotto-type quick release plates.

Tilta Cage for Panasonic GH Series

Gear up your Panasonic GH4, GH5, or GH5S camera with this dedicated dark gray Cage for Panasonic GH Series from Tilta. With its formfitting full-frame design, the cage protects your camera around the top, bottom, and sides without interfering with its operation. The cage provides two cold shoe mounts and multiple 1/4"-20 and 3/8"-16 mounting threads so you can expand your rig with your choice of optional accessories including top and side handles, monitors, and microphones.

The base of the cage also provides several mounting holes so you can easily fine-tune the balance of your setup when mounting your camera on a gimbal. A variety of optional baseplates can be attached to the bottom of the cage, allowing for custom configurations. A Tiltaing hand strap is included in the package.

Compatibility

• Panasonic GH Series

Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)

Custom build your Tiltaing camera rig with this Arca-Swiss–compatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.

Note: Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

• Most Tiltaing camera cages
• Arca-Swiss support systems

Note: Not compatible with the Tiltaing BMPCC 4K/6K cage

Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)

Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.

Note: Not compatible with the Tiltaing BMPCC 4K/6K cage.

Compatibility

• Most Tiltaing camera cages
• Manfrotto 577, 500, 701 support systems

Note: Not compatible with the Tiltaing BMPCC 4K/6K cage

Tilta HDMI Extension Cable for Tiltaing Camera Cages

This HDMI Extension Cable from Tilta is primarily designed to connect to your camera inside your Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. Simply plug the male HDMI end into the camera, and connect your display's HDMI cable to the female port of this extension cable. It is also compatible with Tilta's HDMI cable clamps for security.

Tiltaing Side Power Handle with Run/Stop Type I (Tilta Gray)

This Tiltaing Side Power Handle with Run/Stop Type I from Tilta, in Tilta gray, slides onto the base of the half and full Tiltaing Camera Cages for BMPCC 4K/6K, Panasonic GH Series, Nikon Z6/Z7, Sony a6, and Fuji XT3/XT4. It provides more flexibility when operating and handling the cage. A battery port on the bottom of the handle allows you to use a Sony F570 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle. The handle also has a built-in R/S button to allow you to record run/stop your camera with a compatible, optional R/S cable.

Tilta Side Power Handle Run/Stop Cable for Panasonic GH4/5/5s and S1H

This Run/Stop Cable is designed for the Tilta Side Power Handle with Run/Stop. It has a coiled design and allows you to connect the handle to the Panasonic GH4, GH5, GH5s, and S1H to allow run/stop control from the handle. A 7-pin connector on one end plugs into the handle, and a DC connector on the other end connects to the camera.

Tilta HDMI and Run/Stop Cable Clamp for Panasonic GH Series (Tilta Gray)

Secure your Panasonic GH series camera cables with the Tilta gray HDMI and Run/Stop Cable Clamp from Tilta when your camera is mounted in the Tiltaing GH Series camera cage. Attach this aluminum clamp securely to the cage using the included screws, thread the HDMI and run/stop cables through, and then fasten the clamp thumbscrew to prevent accidental cable pulls or disconnects.

Compatibility

• Tiltaing camera cage for Panasonic DMC-GH4, GH5, or GH5S