Use the Tiltaing Z CAM E2-S6/F6 Kit C from Tilta to protect, provide fingertip focus control and extended battery power, and add accessory mounts to your Z CAM E2-S6 or E2-F6 camera. This Tilta Gray kit includes a full camera cage, the side focus handle type II, a 15mm LWS baseplate, a quick release top handle, a Samsung T5 SSD holder, both Arca-Swiss and Manfrotto-style quick release plates, a side rod bracket, two 7.8" 15mm rods, and several cables.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta Full Camera Cage for Z CAM E2-S6/F6 (Tilta Gray)
The Tilta Gray Full Camera Cage for Z CAM E2-S6/F6 from Tilta protects your camera while providing a variety of accessory mounting options. This dedicated cage also incorporates two ARRI-style rosettes for attaching handgrips or other components. This cage is compatible with Z CAM E2-S6 and E2-F6 camera bodies.
Constructed from an aluminum alloy and stainless steel, the Tilta Z CAM E2-S6/F6 cage incorporates multiple 1/4"-20, 3/8"-16, and ARRI-style anti-twist threads and one cold shoe mount. Access to the camera's controls and ports is maintained when the cage is mounted on your camera, and the base incorporates several tripod/gimbal mounting holes.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Compatibility
Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)
Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.
The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta Samsung T5 SSD Holder for BMPCC 4K Cages (Tilta Gray)
Add a solid-state drive to your Blackmagic Design Pocket Cine Camera 4K with this Tilta gray Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Compatibility
Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)
Custom build your Tiltaing camera rig with this Arca-Swiss–compatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Compatibility
Note:Not compatible with the Tiltaing BMPCC 4K/6K cage
Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Tilta Gray)
Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this Tilta gray plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Compatibility
Note: Not compatible with the Tiltaing BMPCC 4K/6K cage
Tilta Side Focus Handle Type II (F570, Tilta Gray)
In Tilta gray, this Tilta Side Focus Handle Type II supports a Sony F570 battery and lets you power and control the Nucleus Nano motor, sold separately. Alternatively, it can be used to power and control start/stop on compatible cameras. The handle includes the Tilta Type II mounting bracket, which features an ARRI rosette mount for attaching to cages such as the Tilta Z CAM cage.
The handle features two outputs. An 8V micro-USB output is used to connect to the Nucleus Nano motor, so you can control it via a finger wheel on the front of the handle. This same port is used to connect to a camera over a camera-specific micro-USB run/stop cable for Nucleus Nano. You can then use the run/stop button on the top of the handle. Next to the micro-USB port is a 12 VDC output that can be used to power the camera from your F570 battery. You can also choose not to make use of this port and still use the run/stop function. A battery and cables are all sold separately.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta Nucleus-Nano Run/Stop Cable for Sony FS7/FS5, URSA, EVA1, Z CAM Cameras
Use this Nucleus-Nano Run/Stop Cable from Tilta to connect your Sony FS7/FS5, Blackmagic Design URSA, Panasonic EVA1, or Z CAM camera to the control port of the Nucleus-Nano motor to control run/stop operation. The cable has a right-angle Nucleus-Nano control connector on one end and a right-angle LANC connector on the camera end.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta 12V Micro DC Male to Z CAM Power Cable
The 12V Micro DC Male to Z CAM Power Cable from Tilta enables you to power your Z CAM E2 camera using an external battery mounted on select Tiltaing side handles.
This cable has a micro DC male connector on one end and a 3-pin LEMO-type connector on the other.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta 90° USB Type-C Cable for Z CAM E2
The 8" 90° USB Type-C Cable for Z CAM E2 from Tilta is designed to specifically for the Tiltaing Z CAM E2 camera cage. Incorporating two right-angle USB Type-C connectors, this cable is designed to hang flat against the cage and features thumbscrew anchors on each end.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta 15mm Single Rod Holder for Camera Cage Side (Tilta Gray)
Add an accessory to the side of your Tilta full or half cage with this Tilta gray 15mm Single Rod Holder. The aluminum and stainless steel holder attaches to the side of the cage using the included thumbscrew and holds a single, separately available 15mm rod to add additional accessories to your rig.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Tilta 15mm LWS Baseplate Type I (Tilta Gray)
Featuring a Tilta gray finish, the Tiltaing 15mm LWS Baseplate Type I is designed to work with the Tiltaing half and full cages for the BMPCC 4K/6K and Z Cam. The baseplate features integrated 15mm LWS rod clamps with spring-loaded locking levers that allow you to lock or loosen the clamps, even when you can't rotate the levers a full 360°. The bottom of the baseplate is compatible with standard Tilta dovetails.
Note: Not compatible with Z CAM E2, E2C, or E2G cameras.
Works with Tiltaing full and half camera cages for BMPCC 4K/6K and Z Cam. It is also compatible with Tiltaing full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras.
The Tilta gray finish is a uniform gray color.
Tilta Single 15mm Aluminum Rod (7.87", Anodized Black)
This Tilta Single 15mm Aluminum Rod is 7.87" in length and anodized black. It is compatible with 15mm LWS and studio rod support clamps and chamfered to make it easier to slide rod-mounted accessories onto the end.
Support Type | Cage |
Grip Type | None |
Camera Compatibility | Z CAM E2-F6, Z CAM E2-S6 |
Mounting
Accessory Mounting | Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread, Multiple x Anti-Twist 3/8"-16 Thread |
Tripod Mounting | 1/4"-20 Thread, 3/8"-16 Thread |
Shoe Mounting | 1 x Cold Shoe |
Rosettes | 2 x ARRI Rosette w/ M6 Thread |
General
Materials | Aluminum, Steel |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 1.065 lb |
Box Dimensions (LxWxH) | 5.85 x 5.05 x 4.1" |
Item Type | Topside Handle |
Rotation | No |
Mounting
Attachment Method | Attaches via 1 x Built-In Screw (Unspecified Type) |
Compatibility | Attaches onto Camcorder Support for: Blackmagic Pocket Cinema Camera 4K |
Rod Standard | 15 mm Single Rod |
Rod Ports | 1 x 15 mm Rod Port |
Accessory Mounting | Multiple x 1/4"-20 Thread Multiple x 3/8"-16 Thread |
Shoe Mounting | 2 x Built-In Cold Shoe Slot |
Rosettes | None |
Rail Mounting | None |
General
Materials | Aluminum, Steel |
Dimensions | 5.6 x 2.8 x 0.8" / 14.3 x 7.1 x 1.9 cm |
Weight | 6.1 oz / 172.8 g |
Packaging Info
Package Weight | 0.5 lb |
Box Dimensions (LxWxH) | 7.1 x 4.2 x 1.8" |
General
Material of Construction | Aluminum, Stainless Steel |
Weight | 1.3 oz / 37 g |
Packaging Info
Package Weight | 0.08 lb |
Box Dimensions (LxWxH) | 3.25 x 2.3 x 1.1" |
Materials | Aluminum Alloy, Stainless Steel |
Dimensions | 4 x 4 x 3" / 10.2 x 10.2 x 7.6 cm |
Weight | 3.2 oz / 91 g |
Packaging Info
Package Weight | 0.07 lb |
Box Dimensions (LxWxH) | 4.3 x 2.9 x 0.35" |
Materials | Aluminum Alloy, Stainless Steel |
Dimensions | 4 x 4 x 3" / 10.2 x 10.2 x 7.6 cm |
Weight | 3.2 oz / 91 g |
Packaging Info
Package Weight | 0.065 lb |
Box Dimensions (LxWxH) | 4.25 x 2.6 x 0.4" |
Item Type | Single Handgrip |
Built-In Controls | Remote Trigger |
Mounting
Attachment Method | Attaches via Rosette |
Shoe Mounting | None |
Rosettes | 1 x ARRI Rosette w/ M6 Thread |
Rail Mounting | None |
General
Inputs/Outputs | 1 x Micro-USB (8 VDC) 1 x DC Barrel (12 VDC) |
Materials | Aluminum, Steel |
Dimensions | Not Specified by Manufacturer |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.625 lb |
Box Dimensions (LxWxH) | 5.6 x 4.4 x 2.8" |
Material of Construction | Plastic, Rubber, Stainless Steel |
Compatibility | Sony FS7/FS5, URSA, EVA1, Z CAM Cameras |
Connectors | Nucleus-Nano Motor Control Connector Right-Angle LANC |
Length | Not Supplied by Manufacturer |
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 5 x 4 x 0.05" |
Connector 1 | 1 x DC Barrel Male |
Connector 2 | 1 x 3-Pin LEMO |
Voltage | 12 VDC |
Packaging Info
Package Weight | 0.05 lb |
Box Dimensions (LxWxH) | 4.9 x 2.85 x 0.45" |
Connectors | 2 x USB Type-C (Right-Angle) |
Length | 8" / 20 cm |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.055 lb |
Box Dimensions (LxWxH) | 4.35 x 3.05 x 0.65" |
General
Material of Construction | Aluminum, Stainless Steel |
Rod System | 15 mm |
Weight | 0.6 oz / 15.9 g |
Packaging Info
Package Weight | 0.095 lb |
Box Dimensions (LxWxH) | 3.95 x 2.55 x 1" |
Support Type | Baseplate |
Grip Type | None |
Camera Compatibility | Blackmagic Pocket Cinema Camera 4K |
Mounting
Rod Standard | 15 mm LWS / 60 mm Spacing |
Accessory Mounting | None |
Rod Ports | 2 x 15 mm Rod Port |
Shoe Mounting | None |
Rosettes | None |
General
Materials | Aluminum, Steel |
Dimensions | 3.13 x 3 x 1.68" / 7.94 x 7.62 x 4.25 cm |
Weight | 9.1 oz / 258.5 g |
Packaging Info
Package Weight | 0.685 lb |
Box Dimensions (LxWxH) | 5.6 x 4.3 x 2.8" |
General
Diameter | 15 mm |
Length | 7.87" / 200 mm |
Material | Aluminum |
Thread Type | None |
Number of Rods | 1 |
Packaging Info
Package Weight | 0.13 lb |
Box Dimensions (LxWxH) | 9.3 x 1.2 x 1.2" |