This Wooden Camera Unified Accessory Kit features the Pro configuration and is suitable for use with Nikon D810 and D800 cameras. It includes the large version of the Unified DSLR Cage with Wood Grip and a height-adjustable baseplate with integrated rod clamps that allows you to set the correct lens center to rod center height for cine accessories when using the included pair of 15" 15mm support rods.

The kit includes a 12" safety dovetail that enables mounting your camera on the baseplate and balancing your rig on a tripod. The A-Box adapter is designed specifically to allow you to use XLR mics with your camera's 3.5mm stereo input. The Ultra Arm is 3" long and features a 1/4"-20 threaded rod at each end. The included 15mm LWS rod clamp attaches to the battery slide, combining to create a flexible battery mounting system with the addition of a separately available battery plate.

Wooden Camera Unified DSLR Cage with Wood Grip (Large)

Build up your DSLR camera for professional video and cinema production with Wooden Camera's large Unified DSLR Cage with Wood Grip. The cage itself surrounds your camera on three sides, adding a measure of protection to larger DSLR cameras like Canon's 1D series or Nikon's D3, D4, and D5 bodies. The Unified Cage also fits smaller DSLR or mirrorless cameras with an installed battery grip.

Both 1/4"-20 and 3/8"-16 threaded holes line the top and sides of the cage for securing accessories such as articulating arms. The top of the cage leaves the space above the camera's accessory shoe unobstructed for mounting audio accessories such as XLR adapters. A height-adjustable, dual-rod clamp enables you to mount 15mm rods for supporting accessories like matte boxes and follow focus units.

An HDMI cable clamp on the cage's vertical post protects the camera's HDMI port from cable snags. The kit also includes all necessary mounting screws and an articulating wood-grip top handle.

Compatibility

DSLR cameras 5" or taller
Canon 1D Mk IV, 1D Mk III, 1D X Mk II, 1D X, 1D C
Nikon D850, D810, D800, D5, D4S, D4, D3X
DSLR cameras with an installed battery grip such as the Sony Alpha series or Fujifilm X-H1

Reversible Top Handle

The reversible top handle has a wood grip which provides additional ways to comfortably handhold your camera. A cold shoe at the top can be used to mount a microphone, monitor, or other camera-top accessory. The handle folds for travel and can be alternately secured onto the left vertical rod for a secondary grip.

15mm LWS Rod Support

15mm LWS rods can be secured using the integrated rod clamp. The rod height is adjustable to ensure correct optical axis placement for matte boxes and follow focuses.

Wooden Camera Unified DSLR 15mm Baseplate

Expand the capabilities of your Wooden Camera Unified DSLR Cage with the Unified DSLR 15mm Baseplate. The baseplate itself holds 15mm rods at the correct placement to comply with the lightweight support (LWS) standard. Four height-adjustable posts secure to the base of the small or medium variations of the Unified DSLR Cage to ensure the correct optical axis height (the large variation of the cage has its own built-in rod clamp). The bottom of the baseplate has a dovetail clamp quick release enabling convenient tripod mounting. The dovetail clamp complies with the ARRI dovetail standard and can be easily secured to all dovetail plates of that standard, as well as Wooden Camera's own dovetails and shoulder rigs. Having multiple quick release options in a single system enables you to remove the entire rig from the tripod to go handheld, or just the camera from the rig for a minimalist setup.

Wooden Camera 15mm Support Rod (6")

This is a single, 6" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

Wooden Camera 15mm Support Rod (9")

This is a single, 9" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

Wooden Camera Safety Dovetail Plate (12")

The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Wooden Camera A-Box for DSLR Cameras

Designed for DSLRs and any camera with a single 3.5mm audio input, the Wooden Camera A-Box for DSLR Cameras adapts two standard XLR male plugs to one right angle 3.5mm stereo plug. This lets you use professional grade microphones to improve the quality of your in-camera audio recording. The A-Box works best with cameras that allow for auto gain control to be disabled.

The A-Box features a single 19mm rod port for clamping onto an industry standard 19mm rod. A 15mm adapter bushing is included for mounting on a 15mm rod. Also included is a bolt-on 19mm rod and for attaching to any 1/4"-20 threaded hole.

Note: This adapter does not provide phantom power.

Wooden Camera Ultra Arm Monitor Mount (1/4"-20 to 1/4"-20, 3" Extension)

This 1/4"-20 to 1/4"-20 Ultra Arm Monitor Mount from Wooden Camera features a 3" extension connecting two double ball-joint clamps. A lever in the center of each clamp locks the joints on it, and the mounting points on the ends of the arm attach to your gear easily at the turn of integrated tightening knobs. Both ends feature rubber pads for more secure support.

The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end-points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and even a Preston mounting bracket. Additionally, the system is compatible with many 3rd-party 25mm ball mount systems.

Key Features

• Full range ball-joint articulation
• Integrated tightening knobs
• Rubber pads
• Interchangeable end-points support optional NATO clamps, NATO rails, shoe mounts, super clamps, and more (see Accessories tab)
• Also compatible with 3rd-party 25mm ball mount systems

Wooden Camera 15mm Rod Clamp

The Wooden Camera 15mm Rod Clamp attaches to 15mm rods to add 1/4"-20 screw-holes to your camera rig. Among the variety of accessories that can be mounted to these screw-holes is Wooden Camera's QB Battery Back Plate. This plate comes in different versions, each designed to have a different type of battery plate and ultimately battery attached to it. With these attached, the QB Battery Back Plate can be mounted right onto the screw-holes of the Rod Clamp. The ability to attach so is especially useful when you have no way of mounting a battery directly onto your camera and as an alternative are looking for a way to get the battery near the camera (so you can connect the two).

Wooden Camera Battery Slide

The Battery Slide from Wooden Camera is an adjustable mounting system for V-Mount, Gold Mount, QRC Gold Mount, and RED/BLUESHAPE battery plates. Multiple rows of pass-through holes allow the attachment of rod clamps, cheese plates, and other accessories.

In order to adjust the plate's position, the user only needs to apply firm pressure to tilt it into place. Sliding the plate into position is facilitated by an adjustable thumbscrew. Both these movements make the plate ideal for adjusting counterbalance and transitioning from studio to handheld position.