0 0
0
No products in the cart.

Shopping Cart

Radial Engineering StageBug SB-5 Stereo Laptop DI

524.00

  • Connects a Mobile Device to a PA/Mixer
  • 3.5mm TRS Male Plug on 5' Attached Cable
  • Switchable -15 dB Pad
  • Custom-Wound Transformers
  • 2 x 1/4" TRS Outputs
  • Balanced XLR 3-Pin Output
  • Integrated Cable Management Hooks
  • Stereo-to-Mono Merge Function
  • Ground-Lift Switch
  • Passive Design Requires No Power Source

Items Included


  • Radial Engineering StageBug SB-5 Stereo Laptop DI
Not in stock - Order now and we'll deliver when available - Normally ships in 4-6 weeks
Quantity

Categories: Direct Boxes

The Radial Engineering StageBug SB-5 is an ultracompact passive direct box designed for DJs, musicians, and presenters who need a simple, reliable solution for connecting a smartphone, tablet, or laptop to a PA system, a mixing console, or an audio interface. Equipped with two custom-wound transformers, it reduces hum and buzz while allowing long cable runs.

The StageBug SB-5 features a 3.5mm TRS stereo mini plug on an attached 5' cable for direct hookup to your mobile device. Outputs include two 1/4" TRS jacks and a balanced XLR 3-pin male connector. A stereo-to-mono merge function allows easy routing of your stereo source into a mono mixer channel. Use the -15 dB pad to avoid distortion when dealing with high-output content such as mastered tracks.

Thanks to its passive design, the StageBug SB-5 requires no batteries or phantom power. It sports a ground-lift switch to inhibit problematic noise from ground loops. Integrated side-panel hooks enable convenient and tidy cable management.

  • Easy-to-use interface for connecting any mobile playback device to a mixer or PA system
  • Attached 5' cable with a right-angle 3.5mm TRS stereo mini plug for direct connection to your laptop, smartphone, or tablet
  • Two custom-wound transformers isolate signals to prevent hum/buzz and balance the audio to feed long cable runs without noise
  • Left and right 1/4" TRS outputs for stereo operation
  • Mono XLR 3-pin output
  • -15 dB pad prevents distortion from high-output audio sources
  • Side-panel cable hooks allow tidy cable management
  • Passive design requires no power source
  • Ground-lift switch eliminates ground-loop noise

General
Item Type
Standard DI
Number of Channels
2-Channel
Active/Passive
Passive
Circuitry
Solid-State
Preamp
Pad
-15 dB
Ground Lift
Yes
Polarity Reverse
No
EQ & Tone Shaping
Low-Cut/High-Pass Filter
No
Connectivity
Audio I/O
1x 1/8" / 3.5 mm TRS Unbalanced Stereo Male Input on Attached Cable 
2x 1/4" TRS Balanced Output 
1x XLR 3-Pin Balanced Output
Performance
Frequency Response
20 Hz to 20 kHz ±1 dB
Maximum Input Level
+20 dB
Input Impedance
40 Kilohms (Unbalanced)
Output Impedance
2.8 Kilohms (Balanced)
Total Harmonic Distortion/Noise
0.01% (at 1 kHz)
Power
Operating Voltage
No Power Required
Physical
Dimensions
4.5 x 1.9 x 1.4" / 11.4 x 4.7 x 3.4 cm
Weight
8.8 oz / 250 g
Packaging Info
Package Weight
0.87 lb
Box Dimensions (LxWxH)
7.35 x 4.8 x 2.1"

Add your review

Your email address will not be published. Required fields are marked *

Please login to write review!

Upload photos

Looks like there are no reviews yet.

Items Included


  • Radial Engineering StageBug SB-5 Stereo Laptop DI