The ALEXA Mini LF Accessory Set 19 Essential from ARRI provides a number of accessories suited for handheld, gimbal, and stabilizer use. This 19mm rod-based bundle includes a compact bridge plate with shoulder mount, a 12" dovetail, various accessory mounting brackets, a center handle, an EVF mounting system, an RAB-1 Clamp 2, and a 6.6' camera power cable. This set does not include a distribution box, battery, or set of rods.

ARRI 15mm Reduction Insert for 19mm Rod

The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.

ARRI Bottom Dovetail Plate (12" / 300mm)

Less is more when you're lugging your rig around, so opt for this 12" Bottom Dovetail Plate from ARRI with a weight-reducing cutout design for balancing your camera setup. This updated dovetail offers a medium travel range suitable for prime lenses, and it sports several features that distinguish it from earlier models.

Safety release buttons are located both at the front and back of the dovetail. The front release is especially helpful when using accessories like lens motors that may hang below the level of the baseplate, preventing an easy backward slide off the dovetail. Two removable stopper screws provide additional security when desired and can be parked on the plate when not in use.

Constructed of a robust aluminum alloy, this dovetail has built-in 3/8"-16 and 1/4"-20 threads for mounting on a tripod or quick release plate.

Compatible Heads

Including but Not Limited to:

O'Connor 2060, 2575, 120EX
Sachtler Cine 30

Features

• Use with a separately available sliding bridge plate or sled to balance your camera rig
• Includes safety release buttons on both ends for maximum flexibility
• The two removable stopper screws can be stored on the plate when not in use
• Both 3/8"-16 and 1/4"-20 threads for mounting on a tripod quick release plate or other support
• Robust yet lightweight aluminum alloy build

ARRI Rear Accessory Bracket RAB-1

The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.

ARRI Mini Adapter Plate MAP-2A

The MAP-2A Adapter Plate for ALEXA Mini from ARRI has been updated from earlier versions with an improved rod clamping mechanism. Designed to mount on either the bottom or top of the camera, this adapter enables you to flesh out your ALEXA Mini rig with 15mm LWS rod-mounted accessories (rods available separately).

Wing-style rod holder fasteners on the MAP-2A replace the lever fasteners found on earlier models making for quicker, easier builds and breakdowns. The MAP-2A adapter plate is compatible with studio bridge plates when used with the separately available BPA-4 adapter. Tape measure studs on both sides of the plate aid in measuring precise focus distances.

ARRI Mini Side Bracket MSB-3

The Mini Side Bracket MSB-3 from ARRI is a cage-style component compatible with ALEXA Mini and Mini LF cameras. Designed to fit around the ALEX Mini LF's onboard recorder and its viewfinder connector, this left-side bracket is backwards compatible with, but not required for, the ALEXA Mini.

This bracket helps to protect the camera body while providing multiple 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.

Compatibility

ALEXA Mini LF, ALEXA Mini

Features

• Adds 1/4"-20 and anti-twist 3/8"-16 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone, or as an ARRI ALEXA Mini LF/ ALEXA Mini cage component

ARRI Mini Side Bracket MSB-2

The Mini Side Bracket MSB-2 from ARRI is a cage-style component compatible with the ALEXA Mini and the right side of the ALEXA Mini LF. This bracket's single rod holder enables lens motor support for lightweight handheld or drone rigs lacking a baseplate rod bracket. The MSB-2 bracket offers native 19mm rod support and 15mm rod support using a separately available bushing.

The MSB-2 bracket incorporates several 1/4"-20 and anti-twist 3/8"-16 threads for mounting accessories. An integrated rosette enables the mounting of a separately available handgrip or handle.

Compatibility

ALEXA Mini and ALEXA Mini LF right side

Features

• Single rod support enables lightweight lens motor support for rigs lacking a baseplate rod bracket
• Native 19mm rod support or 15mm rod support with separately available bushing
• Adds 1/4"-20 and anti-twist 3/8"-16 accessory mounting points
• Integrated rosette for mounting a handgrip or handle
• Use alone or as an ARRI ALEXA Mini LF/ ALEXA Mini cage component

ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6')

Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.

ARRI Compact Bridge Plate CBP-1 19mm for ALEXA Mini/Mini LF

The ARRI Compact Bridge Plate CBP-1 19mm provides a lightweight option for mounting 19mm Studio-standard accessories to your ALEXA Mini or Mini LF camera. A sliding balance mechanism and quick release system offer the adjustability of a studio bridge plate at a reduced weight. Features include right and left rosettes, front 19mm Studio rod support, and a built-in, contoured shoulder pad. Use the CBP-1 19mm bridge plate to mount camera accessories onto a pair of separately available rods or the ARRI-standard rosettes.Quick Mounting/Detaching

• A quick release system enables you to mount or detach the camera without sliding out the balance assembly.
• Provides a quick transition to a stabilizer's dovetail.

Optional Rod Brackets

• Add 19mm Studio rod-mounted accessories in front of your ARRI ALEXA Mini.
• Attach single or dual rod brackets as needed to save weight on your rig.

Dual Rosettes

Rosettes on both right and left sides for attaching a handgrip or other rosette-based accessory.

Contoured Shoulder Pad

Integrated, contoured shoulder pad increases comfort while operating handheld.

ARRI RAB-1 Clamp 2

Designed for use with the ALEXA Mini LF camera, the ARRI RAB-1 Clamp 2 is an updated version of the earlier RAB-1 Clamp. The Clamp 2 mounts an ARRI battery plate or power-splitting box further on the left to accommodate the second row of connectors on the rear of the ALEXA Mini LF.

Part of a modular accessory support system, the Clamp 2 is used with the separately available RAB-1 Rear Accessory Bracket. This clamp features a locking mechanism for additional security.

Compatibility

ARRI ALEXA Mini LF camera

ARRI CCH-2 Center Camera Handle

Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.

Features

• Sturdy carrying handle attaches to a UAP-2 adapter plate (available separately) to provide accessory mounts
• Adds multiple 3/8"-16 threaded mounting points to an AMIRA and ALEXA M/Mini Camera, or third-party cameras using ARRI support systems

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

ALEXA Mini

ARRI Rod Mounting Bracket (RMB-3)

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

19mm
15mm (with separately available insert K2.66255.0)