Support your power-hungry production equipment with this V-mount GRANITE MINI 140Wh Li-Ion 2-Battery Kit with Dual Charger from BLUESHAPE. The kit includes two Granite Mini 140Wh V-mount lithium-ion batteries and a dual 6A travel charger.
Each 14.4V battery features 140Wh capacity, two D-Tap outputs for additional equipment, D-Tap charging, IP54 weather resistance, and status monitoring via Wi-Fi using an iOS or Android app. The quiet, fanless charger features two V-mount slots for the batteries and provides a 6A charge per battery. It also features a 14.4V 4-pin XLR output to serve as a UPS backup for your equipment, should its primary power fail.
BLUESHAPE GRANITE MINI 14.4V 140Wh V-Mount Li-Ion Battery
The GRANITE MINI 14.4V 140Wh V-Mount Li-Ion Battery from BLUESHAPE is designed to push a lot of power from a small chassis that is robust, yet matches with the form factor of compact video and cinema gear. On the outside, these batteries are designed for the rigors of a film or video set. The textured finish is easy to grab and is resistant to blemishes from drops and impacts. Both the interior and exterior have been tested to survive multiple vertical drops from up to 6' onto hard surfaces. The reinforced V-mount will accept a charge from most standard chargers, though a separately available BLUESHAPE V-mount charger is recommended.
Aside from being robust, the GRANITE MINI batteries are also powerful. Power-hungry cameras and lights can draw up to 12 amps, between the main battery output and the two D-taps on the sides. In addition to outputting 14.4V power, either D-tap can serve to charge the battery with a separately available D-tap charger. As an extra measure of protection, the D-taps have rubber covers that help maintain the IP54 resistance rating against moisture and dust ingress.
While the 5-LED battery meter is useful and convenient, BLUESHAPE offers a free iOS/Android app that can monitor and control various aspects of the battery, completely wirelessly, over Wi-Fi. The app updates in real-time based on current capacity, charging speed, and power draw. On set, all batteries can be monitored on the same network, so not only do you can know when to grab a fresh battery ahead of time, but which battery is ready to go without having to play a guessing game.
GRANITE Link
Features
GRANITE MINI batteries are compatible with BLUESHAPE's GRANITE LINK. A Wi-Fi communication feature allowing for remote, real-time status monitoring via an included iOS/Android mobile app. Using GRANITE LINK you can check data such as State of Charge, Expected Time to Empty, Cell Temperature, Remaining Capacity, Full Charge Capacity, and Cycle Count. The state of charge and remaining runtime are updated in real time based on the actual load conditions.
Practical Use-Cases
An operator, camera assistant, or technical director can easily monitor the state of batteries in close proximity without having to physically press the button to check on the actual battery. Multiple batteries can be monitored simultaneously from a single device. Additional features through the app allow you to Identify, Lock, Unlock, and Connect to a different network. A Rental Mode is available to limit the period of use when the battery is leased.
Networking
Batteries can create their own Wi-Fi network for single battery monitoring, or can be connected to a master Wi-Fi network. A fleet of batteries can be easily monitored by multiple devices without complicated pairing procedures. Batteries can be given custom names for easy identification.
Construction
Internal Modular Design
The lithium-ion cells are secured inside the pack in a carefully designed and reinforced modular cage. All the metal interconnections and the electronic monitoring board are integrated with the cells making a single core. No otherwise vulnerable wiring is used. The metal cell-to-cell tabs have been thickened using a low-resistance alloy.
Solid External Construction
The external V-Bracket is screwed to the inner core by means of a reinforced metal plate at the base of the battery casing. The outer battery pack shells wrap the inner core and secure it with 8 perimeter screws. A colored rubber gasket is sandwiched in the middle of the outer shells to improve weather resistance and enhances the battery's aesthetics.
BLUESHAPE Dual V-Mount 6A Travel Charger with XLR Output
The Dual V-Mount 6A Travel Charger from BLUESHAPE allows you to charge two V-mount batteries sequentially and features a 4-pin XLR power output. It's very convenient to use, featuring a carry handle and a rotating foot on the bottom for desktop use. This updated model of the CVTR2 charger allows you to use the XLR output as a UPS backup with a quick failover function, and it features a higher 6A simultaneous charge. It is also fanless to ensure a quiet charge. Batteries under 190Wh take less than two hours to charge, while batteries up to 290Wh can take a bit over four hours to charge to 100%.
The charger features a pop-out stand that neatly tucks away underneath when not needed. It can be powered via an included AC cable or the separately available BLUESHAPE In-Car Adapter. A data socket allows for a USB connection with a separately available 4-pin LEMO to USB cable to a computer in order to monitor charging activity and log battery data. The optional BLUESHAPE BSCVMON cable and maintenance utility are required for this, and up to four chargers can be monitored on a single computer.
This charger features a BLUESHAPE technology called IPCS (Intelligent Pre-Charge System) that allows it to provide charge at increased speeds to batteries with fast-charge supporting features, such as pre-charge protection and cell-balancing. IPCS does this by initially boosting very low voltage cells to a state at which charge can be applied with a medium-low current without causing damage. Then it charges with a 300mA current for a while, and when the battery reaches a reasonable voltage state, the charger speeds up the charging process by switching to full throttle. To counteract the increased heat caused by this fast-charging capability, the charger employs another BLUESHAPE technology called CTP (Charger Thermal Protection) that allows the electronics to work out the best possible charge profiles without causing damage, even in adverse temperature conditions.
Key Features
Mount / Series Type | V-Mount |
Chemistry | Lithium-Ion |
Battery Capacity | 9900 mAh / 140 Wh |
Output Voltage | 14.4 VDC |
Maximum Load | 12 A |
Accessory I/O | 2 x D-Tap Output |
IP Rating | IP54 |
Dimensions (W x H x D) | 3.74 x 4.57 x 2.09" / 9.5 x 11.6 x 5.3 cm |
Weight | 1.98 lb / 0.9 kg |
Packaging Info
Package Weight | 2.3 lb |
Box Dimensions (LxWxH) | 7.2 x 5.5 x 2.7" |
Mount / Series Type | V-Mount |
Number of Battery Bays | 2 |
Output | XLR 4-Pin Female |
Electrical
AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 6 A |
Power Output | XLR 4-Pin Female: 12.5 to 17 VDC at 6 A |
Multi-Bay Charging Modes | Simultaneous |
Recharge Time | 2 to 4 Hours |
Chemistry | Lithium-Ion |
Maximum Wattage | 230 W |
Environmental
Operating Temperature | 32 to 113°F / 0 to 45°C |
Storage Temperature | -4 to 149°F / -20 to 65°C |
General
Indicator | LED |
Dimensions | 10.24 x 5.91 x 3.35" / 26 x 15 x 8.5 cm |
Weight | 2.75 lb / 1250 g |
Packaging Info
Package Weight | 3.7 lb |
Box Dimensions (LxWxH) | 12.6 x 7.7 x 3.7" |