Mounting your PTC-140T camera in challenging locations, where there may not be any nearby power outlets, is made possible with the black HDBaseT PTZ Camera with 20x Optical Zoom and HBT-11 HDBaseT Receiver Box from Datavideo. By employing HDBaseT technology, you greatly reduce setup time and enhance placement flexibility, as this enables you to run a single Ethernet cable to your camera, providing you with reliable connectivity for video, power, and camera control when used with the separately available RMC-180 PTZ Camera Control Unit.

Datavideo HDBaseT PTZ Camera with 20x Optical Zoom (Black)

Add a high-resolution PTZ camera to your conference room, education setting, live event, house of worship, or remote video conference with this black HDBaseT PTZ Camera with 20x Optical Zoom from Datavideo. The camera features remote pan, tilt, and zoom control via a remote control or via IP and serial protocols, and its built-in zoom lens offers an optical zoom range of 20x with a 10x digital zoom to view just about any angle in your setting. The camera supports frame rates and resolutions up to 1080p60, allowing you to utilize high-quality video for your broadcasts and internet streams. The camera sends video up to 328' away using Cat 6 cable over its HDBaseT port when paired with a separately available Receiver box. It can also live stream video via the LAN Ethernet port.

With 255 programmable preset positions, you can set the camera to rapidly move between positions using a variety of protocols including DVIP over your LAN, RS-232 using an optional serial controller, or IR control using the included IR remote. The camera compresses using the common, high-quality H.264 and H.265 protocols for streaming over your LAN, and you can simultaneously encode two live video streams using standard RTSP or RTMP protocols that are compatible with a variety of Internet streaming sites. The camera also supports external audio input via its 3.5mm stereo line-level input, and you can mount the camera via the 1/4"-20 threaded mounting thread. There is a red/green tally light on the camera so your room will know whether the camera is on or off.

The camera includes a ceiling mount kit, and you can utilize the separately available WM-1 wall mount kit if you prefer to mount the camera on a wall. In addition to a power supply, safety cable, and UV filter to protect the lens, the camera includes serial cables to get your started.

Key Features

• 20x Optical Zoom, 10x Digital Zoom
• HDBaseT video output up to 328' paired with a Receiver box using Cat 6 cable
• Line-level 3.5mm stereo audio input interface
• H.264/H.265 video compression for streaming
• LAN streaming output via RJ45 Ethernet
• Advanced noise reduction
• Multiple Network Protocols: RTSP, RTMP protocols and support, easy to link to a streaming media server
• VISCA remote serial control support over RS-232 port
• DVIP remote network control via RJ45 LAN port
• Red/green tally light
• 255 preset positions
• Compatible with optional serial controllers such as the HS-1500T, HS-1600T, RMC-180 and RMC-300C
• Compatible with optional WM-1 wall mount

Datavideo HDBaseT to HDMI Receiver

Use the HDBaseT to HDMI Receiver from Datavideo to convert an incoming HDBaseT signal from a PTZ camera and output to HDMI to connect it to a display or projector. The receiver supports up to 1080p video from up to 328' away over Cat 7 or 6 cable, and it also supports up to UHD 4K video from the optional HBT-10 transmitter from a shorter distance away.

The receiver can pass through DVIP control as well as RS-232 and RS-422 serial control using its serial terminal block interface. A power adapter and power cable comes in the box as well as a terminal block to RJ45 adapter for serial control extension. The receiver also supports PoE/PoH (Power-over-Ethernet/HDBaseT) and is compatible with select Datavideo PTZ cameras to provide power over the Cat 7 or 6 cable.

PoE PTZ Camera Compatibility

To provide power over HDBaseT to PTC-140T and PTC-150T