This 2 RU CONNECT+ Full Wireless Kit from Exalux pairs the versatile CONNECT+ Dual-Band Wi-Fi to DMX Gateway with two CONNECT-TX100N DMX transmitters for an out-of-the-box wireless DMX networking solution.

Exalux CONNECT+ Dual-Band Wi-Fi to DMX Gateway

The CONNECT+ Dual-Band Wi-Fi to DMX Gateway from Exalux allows wireless lighting control via an Art-Net compatible app. CONNECT+ is compatible with most DMX apps like BlackOut, DMX Connect+, Luminaire, and more. It makes it possible to control lighting fixtures with an iPad or an Art-Net/sACN console, plus controlling HUE lamps and NYX lamps. It features a high-performance dual-band (2.4 GHz + 5 GHz) MiMo Wi-Fi Access point for reliable and responsive connectivity. Switch the 5 GHz Wi-Fi to use your CONNECT+ with a CRMX transmitter, such as the TX100N, and avoid any interference, or use it if the area is too noisy. It features a mode that makes it possible to automatically select the clearer frequency band.

CONNECT+ makes it possible to manage two DMX universes without adding an additional interface, meeting the needs of the most complex fixtures. It is fully compatible with all DMX applications based on the Art-Net protocol. It can be powered via Ethernet cable using a PoE injector and can power additional DMX devices by connecting them directly via a 5-pin XLR connector.

• Built-in dual-band Wi-Fi MiMo access point
• Built-in dual-universe DMX node
• Built-in DMX recorder
• Built-in Ethernet switch
• RDM compliant
• Compatible with any DMX lighting device or controller
• Multiple XLR outputs for wired DMX distribution
• Multiple RJ45 ports for Ethernet distribution
• V-LOCK battery / DC 5-24V powered
• Power over Ethernet (PoE)
• Integrated tiny DMX recorder can store small sequences for playback
• Firmware upgrade through the USB port
• Power over DMX (PoD) feature on DMX outputs
• Ready for the future with the SnapLink Extension port

Exalux CONNECT-TX100N DMX Transmitter (Basic Kit)

The CONNECT-TX100N DMX Transmitter from Exalux is an ultracompact wireless DMX transmitter that can be used in studios or on location. It can convert a wired DMX console into a wireless DMX console, allowing you to control all your CRMX-compatible lighting fixtures. The TX100N features PoD technology that enables the unit to be powered via its XLR connector. The unit is fully compliant with all LumenRadio CRMX receivers, such as RX100S and RX200N. The external antenna allows for a long range, up to 546 yards, depending on the transmitter and the environment.

Thanks to its wide supply range (5 to 24 VDC), the TX100N can be powered through the USB connector of a DMX fixture, a V-mount battery via the D-Tap connector, or another external power supply, available separately.