The Swift DSLR Camera Dolly with 10.6' Clip Track System from Proaim allows you to use your tripod to achieve super-smooth camera tracking movements. It weighs only 26.4 lb, light enough for one person to handle and just easy enough to maneuver on the fly. It is constructed of high-grade aluminum for a more robust yet lightweight build, and it supports loads up to 350 lb. The dolly can work on both straight and curved tracks, and it can fit through most doorways. High-quality sealed bearings offer super-smooth movements.

The 10.6' heavy-duty clip track system is made of strong yet lightweight aluminum and can hold a 660 lb payload. It comes in four portable sections and is easy and quick to assemble and disassemble. End stoppers prevent run-off and keep the tracks at the proper spacing.

Proaim Swift Camera Track Dolly

Quick to set up and break down, compact for transport, and supporting up to 350 lb., the Proaim Swift Camera Track Dolly is a one-person portable straight track dolly that supports standard tripods for smooth dolly shots. Made from square aluminum tubes and weighing about 26 lb, it can support up to 350 lb yet can be assembled/operated/disassembled by a single person and packed into an included carry bag for transportation and storage. The polyurethane wheels are mounted at a 45° angle in three sets of four, allowing the dolly to glide along round, square, and triangular track with a diameter of 1.25", with a track width of 28" on-center.

The dolly frame has three holes that accept your tripod's feet, creating a stable platform for cinematic pans and tilts while dollying. The 350 lb load capacity allows you to use the dolly with jibs as well as standard tripods, and the built-in anchor point provides extra security when you attach an optional safety tether between the anchor ring and your tripod or jib. A 3/8"-16 threaded stud provides a mounting point for compatible gimbals and flat video heads, enabling you to get that low-angle dolly shot.

Proaim Clip Modular Travel Track (10.6')

• The 10.6' long Proaim Clip Modular Travel Track is made from aluminum to be lightweight, portable, and durable while being able to support up to 660 lb of dolly, gear, and operator. Each track length is made up of four aluminum poles strung together with elastic cords so they can't get easily separated from each other. This allows you to assemble and lay your track down in less than two minutes without the use of tools.
  
  Once assembled, each of the rails is a solid, straight, and smooth surface for your dolly to ride on. As the rails are individual, you can adjust the width between rails to suit your dolly's width. Included track pads go underneath the track rails to protect the floor's surface, absorb track noise, and compensate for any small unevenness in the surface for a smooth dolly move. The Included track ends mount one on each rail to prevent the dolly from accidentally rolling off the track.
• Track sections have an internal elastic cord that keeps them from getting separated
• The two rails have no joiners, which allows you to walk between the track rails without stepping on/over track joiners
• The track folds down to less than 3' in size for portability