For capturing audio the Stereo VideoMic X by RODE Microphones offers professional quality. It can be used as an on-camera mic in various environments, for applications such as interviews, weddings, sports and nature shoots, and more. It features a matched pair of 1/2" condenser capsules configured in a stacked X-Y configuration with cardioid polar patterns, a 40 Hz to 20 kHz frequency response, and 9V battery or 48V phantom power. It is built with a balanced mini XLR (TA3F) output connector, and an unbalanced 1/8" output stereo mini jack plug. The Stereo VideoMic X can deliver professional-grade audio and gets the job done when capturing audio in various environments.
The VideoMic features digital switching on the rear that allows the user to control level adjustment, high-pass filter, and high-frequency boost to increase intelligibility of dialogue. The enclosure is constructed of a lightweight aluminum, and, inside the enclosure, the capsules are supported by the Rycote Lyre shock-mounting system, providing isolation from vibration as well as knocks and bumps. In addition, a pop shield and wind shield is included.
Note:
*Online registration required
Key Specs
Form Factor | Camera-Mount / Stand/Boom Mount |
Element Type | 2 x Condenser |
Polar Pattern | Cardioid |
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 143 dB SPL |
Output Connector | 2 x TA3F 3-Pin Female (on Mic) 1 x 1/8" / 3.5 mm TRS Female (on Mic) |
Microphone
Form Factor | Camera-Mount / Stand/Boom Mount |
Intended Sound Sources | Vocals, Speech/Voice-Over |
Sound Field | Stereo |
Operating Principle | Pressure Gradient |
Element Type | 2 x Condenser |
Diaphragm | 0.5" / 12.7 mm |
Polar Pattern | Cardioid |
Windscreen | Foam, Windsock/Windjammer (Included) |
Performance
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 143 dB SPL |
Off-Axis Rejection | 3 dB at 60° 10 dB at 120° 22 dB at 180° |
Impedance | 200 Ohms |
Sensitivity | -32 dBV/Pa at 1 kHz |
Dynamic Range | 131 dB |
Signal-to-Noise Ratio | 82 dB A-Weighted |
Equivalent Noise Level | 12 dB A-Weighted |
Connectivity
Output Connector | 2 x TA3F 3-Pin Female (on Mic) 1 x 1/8" / 3.5 mm TRS Female (on Mic) |
Cable Length | 6.7 to 15.7" / 17 to 40 cm (Coiled) |
Power
Operating Voltage | 48 V (Phantom Power) 9 V (Battery Power) |
Battery Type | 1 x 9 V (Not Included) |
Approximate Battery Life | 30 Hours |
Physical
Mounting | Camera/Shoe-Mount (via Integrated Hardware) |
Included Case | None |
Included Filters | None |
Construction Material | Aluminum |
Dimensions | H: 3.9 x W: 4 x L: 4.6" / H: 10 x W: 10.2 x L: 11.8 cm |
Weight | 10.6 oz / 300 g (Microphone) |
Packaging Info
Package Weight | 3.07 lb |
Box Dimensions (LxWxH) | 9.3 x 8.9 x 5" |