Designed for 8-series or Scorpio mixers, the Sound Devices CL-16 is a mixer controller that combines the functionality of a traditional channel strip with the power and versatility of modern digital mixers. Once you connect it to your mixer-recorder via the included USB Type-B to USB Type-A cable, you can use the CL-16 to control channels, outputs, menus, metadata, and even on-set communications, and thus, improve the experience of cart-based location mixing.
The CL-16 provides 16 Penny & Giles 100mm linear faders, which are considered some of the smoothest faders around. The unit also offers 16 dedicated trim pots and a panoramic LCD screen that is readable in sunlight. This display will handle much of the necessary read-out information from your 8-series mixer-recorder.
You'll find 32 multifunction controls for adjusting gains past channel 16, as well as for controlling bus gains, output gains, panning adjustments, and EQ. Five user-assignable buttons can be programmed to handle tasks you deem the most important, and built-in USB ports on the rear provide charging for phones, tablets, battery chargers, or other compatible gear. You'll find three USB Type-A and two USB Type-C ports.
Use the ten-pin remote input for custom wiring of LEDs and switches, and make use of the TRS footswitch input as well, for which a 1/4" cable has been supplied. You'll find two headphone jacks—one 1/4", and the other 3.5mm. Power the unit over the XLR 4-pin jack using any separately available compatible cord.
Features
Headphone Outputs | 1 x 1/4" Output 1 x 3.5 mm Output |
Voltage | 0 to 18 VDC over XLR-4 (Available Separately) Pin 4 = +, Pin 1 = Ground |
Current Draw | Min: 560 mA Quiescent at 12 VDC in, All USB Ports Left Open Mid: 2.9 A, USB Ports Total Load 5 A Max: 5.5 A, USB Ports Total Load 10 A |
USB | USB Type-A Ports: 5 V, 1.5 A Each USB Type-C Ports: 5 V, 3 A Each |
Ports | Remote Port Power: 5 V, 1 A Available on Pin 10 Remote Port Input: 60 KOhms Typical; Vih = 3.5 V (Min), Vil = 1.5 V (Max) Remote Port Output: 100 Ohms When Configured as Output |
Foot Switch | 1 kOhms, Typical Connect to Ground to Operate (Active Low) |
Fader Range | 3.9" / 10.0 cm |
Dimensions | Screen Folded Down: 3.2 x 17.1 x 13.0" / 8.0 x 43.5 x 32.9 cm Screen Folded Out: 5.8 x 17.1 x 14.1" / 14.6 x 43.5 x 35.9 cm |
Weight | 10.4 lb / 4.7 kg |