0 0
0
No products in the cart.

Shopping Cart

Radial Engineering JDI Mk3 Direct Box

1,089.00

  • Eliminates Hum & Buzz from Ground Loops
  • Zero Phase & Harmonic Distortion
  • Jensen Transformer Equipped

Items Included


  • Radial Engineering JDI Mk3 Direct Box
Not in stock - Order now and we'll deliver when available - Normally ships in 4-6 weeks
Quantity

Categories: Direct Boxes

The JDI Mk3 from Radial Engineering is a professional, passive direct box that converts hi-impedance instrument signals to a balanced low-impedance output, allowing long cable runs without noise. The unit is ideally suited for all instruments including keyboards, bass guitar, and acoustic guitars for use in studio, broadcast, and live sound reinforcement.

Because of the transformer, the JDI provides 100% isolation between the instrument input side and the balanced output, eliminating hum and buzz caused by ground loops. Passive DIs that use inexpensive iron or steel core transformers can degrade sound through phase shift at various frequencies, a phenomenon known as group delay. This has the effect of making bass sound indistinct, causing the mid-range to smear and lack punch.

The JDI employs a Jensen transformer with a nickel-laminated core which does not retain a memory or polarity. This reduces phase distortion, improves linearity and lowers harmonic distortion. A 15 dB pad is provided for high-level instruments to avoid input distortion. A merge switch converts the thru output to a second input, allowing two signals, such as those from a stereo keyboard, to be summed to mono when input channel availability is limited.

The unit is built to withstand the abuse of the road. The book-cover design features an internal 14-gauge steel skeleton that is corner welded to ensure the internal electronics will never be subjected to outside stress. The military grade PC board is mounted on steel pem nuts and the whole is then enclosed in a second steel casing. The passive design requires no power source.

Phase-coherent professional direct box with 100% passive design and Jensen Transformer equipped
Ultra-linear performance from 20 Hz to 20 kHz
Dual-function inputs with two-channel merge
Polarity reverse, ground lift and pad switches
Ultra-durable welded steel chassis with double sided printed circuit board
No-slip bottom pad and protective channel for switches
Ideal for acoustic guitars and basses, keyboards, modules, and electronic drums

General
Item Type
Standard DI
Number of Channels
Single-Channel
Active/Passive
Passive
Circuitry
Solid-State
Preamp
Pad
-15 dB
Ground Lift
Yes
Polarity Reverse
Yes
EQ & Tone Shaping
Low-Cut/High-Pass Filter
No
Connectivity
Audio I/O
1x 1/4" TS Unbalanced Input
1x 1/4" TS Unbalanced Thru
1x XLR 3-Pin Balanced Output
Merge/Summing
Selectable Input & Thru Merge
Performance
Frequency Response
20 Hz to 20 kHz ±0.2 dB
Maximum Input Level
+21 dBu
Input Impedance
140 Kilohms
Output Impedance
150 Ohms (Balanced)
Total Harmonic Distortion/Noise
0.05% (at 20 Hz)
0.006% (at 1 kHz)
Signal-to-Noise Ratio
-119 dB
Power
Operating Voltage
No Power Required
Physical
Dimensions
5.5 x 3.5 x 2" / 13.97 x 8.9 x 5 cm
Weight
2.2 lb / 1 kg
Packaging Info
Package Weight
1.79 lb
Box Dimensions (LxWxH)
6.35 x 4.2 x 2.9"

Add your review

Your email address will not be published. Required fields are marked *

Please login to write review!

Upload photos

Looks like there are no reviews yet.

Items Included


  • Radial Engineering JDI Mk3 Direct Box