Shop by Department
Categories: Microphones
Featuring integral pop protection and shock-mounting plus a large-diaphragm true condenser capsule and transparent Class-A circuitry, the charcoal gray Shure KSM32/CG microphone is built to deliver excellent transient response and neutral tone in the studio or on stage. Its flat frequency response and selectable settings—two low-cut filter options and a -15 dB pad—make the KSM32/CG honest and versatile, so it can be used on anything from vocals and guitars to drums and piano. The CG model comes with a ShureLock stand mount and zippered storage bag.
The uniform cardioid polar pattern of the KSM32/CG helps reduce the capture of stage bleed and background noise, allowing you to achieve more gain and stronger direct sound. The built-in pop protection utilizes three separate layers to minimize noise from vocal plosives, breaths, and even light wind. Internal shock-mounting helps to decouple the mic from sources of vibration that could otherwise transfer from the mic body to the capsule. Being a solid-state XLR condenser mic, the KSM32/CG requires 48V phantom power.
Class-A Output Stage
Class-A transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range
Extended Low-Frequency Response
Embossed, high-compliance diaphragm provides extended low-frequency response
Excellent Transient Response
Ultra-thin, 2.5 μm, gold-layered, low-mass, Mylar diaphragm for excellent transient response
-15 dB Pad
-15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
Low-Cut Filter
Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
3-Stage Pop Filter
Integrated 3-stage pop protection grille reduces "pop" and other breath noise
Internal Shockmount
Internal shockmount reduces transmission of handling noise
Accessories
Includes ShureLock stand mount and zippered storage bag
Microphone
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Acoustic Guitar, Acoustic Bass, Piano, Drums, Percussion, Overhead, Brass, Woodwinds, Room Ambiance |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Polar Pattern | Cardioid |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| Windscreen | Built-In |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 154 dB SPL (2.5-Kilohm Load, with Pad) 139 dB SPL (2.5-Kilohm Load) 148 dB SPL (1-Kilohm Load, with Pad) 133 dB SPL (1-Kilohm Load) |
| Impedance | 150 Ohms |
| Sensitivity | -36 dBV/Pa at 1 kHz (Open Circuit Voltage) |
| Output Level | 9 dBV (Max) |
| Dynamic Range | 126 dB (1 kHz, 2.5-Kilohms Load) 119 dB (1 kHz, 1-Kilohm Load) |
| Signal-to-Noise Ratio | 81 dB A-Weighted |
| Equivalent Noise Level | 13 dB A-Weighted |
| THD | < 0.08% |
| CMRR | 50 dB |
Connectivity
| Headphone Connector | None |
Power
| Bus Power | None |
| Operating Voltage | 11 to 52 V (Phantom Power) |
| Operating Current Consumption | 4.7 mA |
Physical
| Color | Gray |
| Mounting | Mic Clip/Stand Adapter (Included) |
| Included Case | Zipper Pouch |
| Included Filters | None |
| Dimensions | ø: 2.2 x L: 7.37" / ø: 5.6 x L: 18.72 cm |
| Weight | 17.3 oz / 490.46 g |
Packaging Info
| Package Weight | 2.34 lb |
| Box Dimensions (LxWxH) | 10.15 x 5.45 x 4" |
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
