Categories: Wireless Microphone Systems , Microphones
The SpeechLine Digital Wireless Microphone Set from Sennheiser includes an SL Table Stand 153-S DW, a MEG 14-40-L-II B gooseneck microphone with integrated LED ring, an SL Rack Receiver DW with power supply, a BA 40 rechargeable battery, and a rackmount kit. Optimized for speech transmission, this flexible wireless set offers speech intelligibility and ease of use for meeting participants, in conference rooms, offices, and huddle rooms.
The table stand features a 5-pin XLR port for connecting to the gooseneck microphone; it connects wirelessly to the receiver and can be charged wirelessly or via included USB cable. The rechargeable battery allows up to 10 hours of operation and an LED provides battery life status. The receiver features a clear visible OLED display for easy setup and operation. The automatic frequency and interference management allows convenient and reliable operation. The microphone set can be controlled and monitored remotely via the Sennheiser Control Cockpit software (available separately).
| AF Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | > 120 dB |
| THD | 0.1% at 1 kHz |
| Audio Sampling | 24-bit / 48 kHz |
| Signal to Noise Rate | > 90 dB |
| Encryption | AES 256 |
| RF Frequency Range | US: 1920 to 1930 MHz |
| Modulation | GFSK with back channel |
| Transmission Method | TDMA, space diversity |
| Latency | 19 ms |
| Relative Humidity | 95% maximum |
| Operating Temperature | 14 to 131°F / -10 to 55 °C |
| Storage Temperature | -4 to 158°F / -20 to 70°C |
| RF Sensitivity | < -90 dBm |
| RF Output Channels | Adaptive, up to 250 mW (country-specific) |
| Audio Output Level | XLR Balanced: Maximum +18 dBu RCA Unbalanced: Maximum +6 dBu |
| Audio Effects | Low Cut: -3 dB at 120 Hz Equalizer: 7-band graphic equalizer with sound presets Sound Profiles: Female voice, male voice, and media |
| Display | OLED |
| Network Protocol | Media Control Protocol, TCP/IP IPv4 (DHCP, manual)/IPv6 |
| Power Supply | 12 VDC |
| Current Consumption | 350 mA |
| Connectors | 1 x XLR 2 x RCA 2 x reverse SMA 1 x RJ45 1 x power |
| Dimensions | 8.4 x 1.7 x 6.6" / 21.2 x 4.3 x 16.8 cm |
| Weight | 29 oz / 828 g |
| Nominal Input Voltage | 100 to 240 VAC |
| Power Frequency | 50 or 60 Hz |
| Input Current | Maximum 120 mA |
| Power Consumption | Standby: ≤ 0.3 W |
| Operating Temperature | 14 to 131°F / -10 to 55°C |
| Storage Temperature | -4 to 158°F / -20 to 70°C |
| Relative Humidity | 95% |
| Dimensions | Not specified by manufacturer |
| Weight | Approx. 3.5 oz / 100 g |
| AF Frequency Response | 75 Hz to 20 kHz |
| Max Input | 1.7 V RMS |
| Input Impedance | 30 kOhms |
| Power Supply | BA 40 accupack |
| Operating Time | Up to 10 hours |
| Microphone Connector | 5-pin XLR |
| Operating Temperature | 50 to 113°F / 10 to 45°C |
| Relative Humidity | 95% |
| Dimensions | 6.6 x 4.7 x 1.9" / 16.7 x 12.0 x 4.8 cm |
| Weight | 23 oz / 660 g without battery |
| Model | BA 40 |
| Capacity | 2200 mAh |
| Output Voltage | 3.6 V |
| Pick Up Pattern | Cardioid |
| Frequency Response | 50 Hz to 20 kHz |
| Acoustic Principle | Gooseneck microphone (condenser) |
| Output Impedance | < 100 Ohms at 1 kHz |
| Sensitivity | 15 mV/Pa |
| Maximum Sound Pressure Level (SPL) | 130 dB at 1 kHz < 3% |
| Equivalent Noise Level | 37 dB (CCIR) 26 dB (A) |
| Power Supply | Microphone: 12 to 48 V phantom power Signal Light Ring: 12 to 30 VDC, 1-18 mA, green LED |
| Current Consumption | 3 mA |
| Connector | 5-pin XLR |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | -13 to 158°F / -25 to 70°C |
| Length | 18.0" / 45.7 cm |
| Package Weight | 7.65 lb |
| Box Dimensions (LxWxH) | 16 x 13.8 x 2.9" |
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.